Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gearbox Problems

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 36
Joined: Tue May 25, 2004 4:40 pm
Location: Melbourne

Gearbox Problems

Post by Ridealldayrideallnight »

G'day all, My sierra's gearbox is playing up, It clunks into first second and third and if I stop in neutral it's almost impossible to get back into first. The clutch seems fine doesnt stall or lag so is this a sign that the gearbox is dying or that the clutch is dying?

any info is greatly apreciated
"G_ F_ck Y__rs_lf," Would you like to buy a vowel?
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

Sounds more like a clutch problem that g/box.
Could be the input shaft spigot bearing seized or a problem in the cluth plate or pressure plate. Sounds like something isn't allowing it to release properly.
Not a big job, i'd whip the box out and have a ghanda at the clutch, i'm sure it'll be obvious once it's out.
Cheers Dan
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Posts: 37
Joined: Tue Apr 24, 2007 12:53 pm

Post by Dak Dak »

Hey Buddy, long time no hear. I'd say it's probably the driver :D If you wait until mid September when I'm back I can give you a hand to whip that box out and we can re-live the experience of working on that 4 Runner at FAR!

Good luck.

Clay
Posts: 567
Joined: Fri Jul 20, 2007 7:37 am
Location: Panama

Post by Tapage »

IMOP start with most simple ..

Check your clutch/slave fork movement .. it's right ?

Then start thinking if your bearing or PPlate are bad ..
HJ-60 2H-T Intercoled [url=http://4x4panama.com/foros/viewtopic.php?t=2770]Tencha[/url]
HDJ-80 1HD-T Stock so far " Marilu "
Panama
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest