Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Indipendent Front Suspension ?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Indipendent Front Suspension ?
I was having a discussion on the weekend regarding Indipendent Front Suspension in Toyoto Hilux`s for 4x4 driving. I am hearing different opinions about it.
The Hilux`s have IFS from 1997 onwards ( I think ? ) and reports that I have heard is they are shyt -- They dont "travel " ( hook up ) and a lot of people have steared clear of IFS ? ( They like a solid axle )
Whats the story on IFS ? Who owns a 4by with it and do you have any problems ?
.
The Hilux`s have IFS from 1997 onwards ( I think ? ) and reports that I have heard is they are shyt -- They dont "travel " ( hook up ) and a lot of people have steared clear of IFS ? ( They like a solid axle )
Whats the story on IFS ? Who owns a 4by with it and do you have any problems ?
.
I have a 98 IFS Hilux. They dont have the travel that a solid axle has, they have a smaller diff and if not driven properly can be weak. The CVs are stronger than the solid axle counterparts. They wont last as well as a solid axle in prolonged hard use use, comps etc. However with a front auto locker in them they are more than capable and will suit most peoples needs.
I have a auto locker in mine, I have never broken a diff. I have broken 2 CVs one was incorrect offset rim caused the tyre to bind on the steering arm and break the CV second one was too much right boot with a V8 and 35s on rock. I have had it for 5.5 years and done over 140 000ks in it and it has done everything I have asked of it.
I have a auto locker in mine, I have never broken a diff. I have broken 2 CVs one was incorrect offset rim caused the tyre to bind on the steering arm and break the CV second one was too much right boot with a V8 and 35s on rock. I have had it for 5.5 years and done over 140 000ks in it and it has done everything I have asked of it.
Toy: 98 TJ with some mods and some bling
Tourer and daily: 120 Prado with some mods
Tourer and daily: 120 Prado with some mods
Nothing wrong with IFS unless your a rockcrawler (and then i'm sure some seriously modded stuff could probably work there too)
Wheel travel is not the be all and end all unless you don't run lockers. Lockers take wheel travel out of the equasion.
IFS + Lockers = go anywhere you want and more.
IFS without lockers = you really need to know your car well and drive it like an IFS not like a solid axle car.
I love my IFS and wouldn't go SAS.
IFS Comp trucks are coming....
Catcha
Leeham
Wheel travel is not the be all and end all unless you don't run lockers. Lockers take wheel travel out of the equasion.
IFS + Lockers = go anywhere you want and more.
IFS without lockers = you really need to know your car well and drive it like an IFS not like a solid axle car.
I love my IFS and wouldn't go SAS.
IFS Comp trucks are coming....
Catcha
Leeham
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
www.vickrawlers.com
Posts: 1379
Joined: Mon May 07, 2007 8:28 pm
Joined: Mon May 07, 2007 8:28 pm
Location: West of Woodridge, North of Ipswich, South of Oxley, East of Wacol
an upper balljoint flip will give you 3" more down travel (switches from the up travel)
apparently doing this doesnt stress the cv's unlike winding the torsen bars up
apparently doing this doesnt stress the cv's unlike winding the torsen bars up
'98 Jackaroo
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
IMOP for mid low off road with OFS you are fine .. you set of locker and will be fine .. but if you want go over 35" and hard core off road .. of big $$$$ mods for your IFS or SAS
IFS

IFS

HJ-60 2H-T Intercoled [url=http://4x4panama.com/foros/viewtopic.php?t=2770]Tencha[/url]
HDJ-80 1HD-T Stock so far " Marilu "
Panama
HDJ-80 1HD-T Stock so far " Marilu "
Panama
Please explain this - I think there are a couple of concepts here.chikoroll_ wrote:an upper balljoint flip will give you 3" more down travel (switches from the up travel)
apparently doing this doesnt stress the cv's unlike winding the torsen bars up
A) Winding up torsion bars increases static height but as such resets the "centre" of the suspension- so instead of having 3" of compression and 3" of droop at the wheel, you have maybe 5" of compression and 1" of droop. This MAY increase wear on the CV's because they are operating a steeper angle for most of their working time, but all up the CV's are still in the factory working range.
B) Anything that significantly increases droop in an IFS beyond factory limits will seriously effect the CV's. It will invite catastrophic failure in a full lock/full droop situation.
Tread very carefully if increasing travel in an IFS front end.
To the original question- Hilux IFS is probably the worst design ever for wheel travel. They are terrible. The key is that with an IFS car, travel and articulation are exactly the same number - in the case of an IFS hilux, about 6". IFS hiluxes are also tall like a SPOA solid axle car, have torsion bars that make tuning spring rate difficult, bend idler arms and twist chassis rails if you abuse them due to the placement of the compression bumpstops.
A stock live axle hilux has about 6" of vertical travel, but far more than this in articulation due to the pivot point of the live axle. when you add that increased travel (and therefore articulation) is very easy to add to a live axle car, but very difficult in an IFS design with rebound rubbers like a hilux, the solid axle will always come out in front.
As for IFS comp cars - sure - one could be built and might work well in an OBC type environment, but the $$$ and engineering involved would be scary.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 1379
Joined: Mon May 07, 2007 8:28 pm
Joined: Mon May 07, 2007 8:28 pm
Location: West of Woodridge, North of Ipswich, South of Oxley, East of Wacol
not sure if it's for all but here's a link for the jackaroo style http://www.expeditionswest.com/equipmen ... nsion.htmlGwagensteve wrote:
(reply about the IFS)
'98 Jackaroo
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
Who is online
Users browsing this forum: No registered users and 1 guest