ok so my poor patrols got a plastic bull bar..must admit though it suits it!
now iv made up a set of front "H" racks for it. Iv made brackets up which have been welded to square tubing so the racks can be pulled out.The brackets have been bolted to the bolt holes which have been cast in the bull bar.
Now not having the smartbar "manual" im unsure on how much down force can be exhurted on the thread castings before the pull out..
I dont plan on putting any stupid amout of weight on them but it would be good to know! in past experiences iv had around 350-400 odd kg on 2 rino racks before.. and thev held up fine! so much for the 50kg safe work load..lol
any help would be appreciated
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Safe load rating for gu smart bar??
Safe load rating for gu smart bar??
00 td42t wagon
stock engine, set up for work and play!
engine soon to be honking ;-)
stock engine, set up for work and play!
engine soon to be honking ;-)
Who is online
Users browsing this forum: No registered users and 3 guests