Would anyone have the engine specs for the Mitsu/Australian-built station wagon that was sold in the US between '92 and '95? It was called a Diamante here - not sure what it was called at home in Oz.
I'm particularly interested in the 6G72 3.0L SOHC 12v variant:
1) HP
2) Torque
3) compression ratio
4) valve timing
Was there any difference in the SOHC engines for those years?
I'm trying to source a block and cams for a S/C Pajero project and am curious about this engine.... it's difficult to find info on it since so few were sold here.
Thanks,
Frank
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Diamante Station Wagon 3.0L Engine Specs Needed
Moderator: -Scott-
Diamante Station Wagon 3.0L Engine Specs Needed
'89 G-Raider Supercharged 3.0L V6, MegaSquirt 2, lockup A/T, 2.5" exhaust, Cibie H4s/Oscar SCs, Hella Micro DE fogs, S/W hubs, Bilsteins, 165A alt., Aussie Locker front/LSD rear
Try this forum http://www.aussiemagna.com/forums/index.php?
Dave
Dave
Thanks, fellas - I've found the info and bought a Diamante/Magna engine - will build a new S/C engine on that block - minus the 10:1 pistons, though. I do like the knock sensor and the longer duration cams.
Cheers,
Frank
Cheers,
Frank
'89 G-Raider Supercharged 3.0L V6, MegaSquirt 2, lockup A/T, 2.5" exhaust, Cibie H4s/Oscar SCs, Hella Micro DE fogs, S/W hubs, Bilsteins, 165A alt., Aussie Locker front/LSD rear
Who is online
Users browsing this forum: No registered users and 7 guests