Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

JT2 on 3in lifted GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

JT2 on 3in lifted GQ

Post by jtraf »

Got a set of 34x11.5 JT2 for the GQ......

It has 3in lift at the moment.......

As it is the wifes daily driver I have been advised no more lift.........

Now seeing the size of the tyre is close to 35 will radias arms spacers and extended bump stops make the tyres clear for offroad?

Looking for very little or no cutting and no more lift what are the options?
Posts: 98
Joined: Sun Dec 04, 2005 5:09 pm
Location: cessnock

Post by CruiserPatrol »

I had 34x10.5 jts on 2" lift and took off the standard flares to gain clearance. They only just touched the inner wheel well at the rear drivers side.I used cruiser offset rims to get them out further too.
The extra width may change things for you though.

dave
I'll give it a go!!!!!
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: JT2 on 3in lifted GQ

Post by bogged »

jtraf wrote:Looking for very little or no cutting and no more lift what are the options?
dont listen to her!! Do a bodylift while she aint lookin.. 2 hours its done. ;)
my JT's were fine on the GQ but that was 4inch +30mm... still wiped on the inner guards :(

Image
Last edited by bogged on Fri Aug 17, 2007 1:24 pm, edited 1 time in total.
Posts: 434
Joined: Wed Jul 13, 2005 10:07 am
Location: Gold Coast

Post by waxhead.. »

My old man's play rig is a GQ shorty with 3" spring, 2" body and 34" JT2's and they scrub.
92 WT Sierra
04 Navara STR Dual Cab 3.0di
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests