have a question, has anybody out there ever installed impeza rear diff into 1600 / 180b as i know the housings are identical but not too sure of the internals
any info would be helpful
where can i get an R200??
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
help needed from the datsun 1600 gurus
Moderators: toaddog, TWISTY, V8Patrol, Moderators
help needed from the datsun 1600 gurus
HI ALL,
have a question, has anybody out there ever installed impeza rear diff into 1600 / 180b as i know the housings are identical but not too sure of the internals
any info would be helpful
where can i get an R200??
have a question, has anybody out there ever installed impeza rear diff into 1600 / 180b as i know the housings are identical but not too sure of the internals
any info would be helpful
where can i get an R200??
It's been done, and there is a lot of info on these out there.
R160, R180 and R200 are not identical housings, in fact the R200 is a fair bit bigger afaik. What you are probably thinking of is that an R160 in a subaru is the same as an R160 in a datto, which is correct except for things like the half-shafts. I think LSD is more common (but still not that common) in subarus.
You will find R200's in dattos as well as subies, too.
It depends what you're after, if you are looking for a change in ratio then you could just swap another R160 in, if you need something stronger then you might want an R180 or R200 but you might still want one from a datto for the half-shafts and possibly the axle assembly, as I am not sure you'll be able to use your exisiting R160 half shafts in an R180 or R200.
If on the other hand you are after LSD, good luck; I think they are pretty sought-after.
Anyway there is heaps of info on all this, eg:
http://www.google.com.au/search?q=R160+ ... =firefox-a
R160, R180 and R200 are not identical housings, in fact the R200 is a fair bit bigger afaik. What you are probably thinking of is that an R160 in a subaru is the same as an R160 in a datto, which is correct except for things like the half-shafts. I think LSD is more common (but still not that common) in subarus.
You will find R200's in dattos as well as subies, too.
It depends what you're after, if you are looking for a change in ratio then you could just swap another R160 in, if you need something stronger then you might want an R180 or R200 but you might still want one from a datto for the half-shafts and possibly the axle assembly, as I am not sure you'll be able to use your exisiting R160 half shafts in an R180 or R200.
If on the other hand you are after LSD, good luck; I think they are pretty sought-after.
Anyway there is heaps of info on all this, eg:
http://www.google.com.au/search?q=R160+ ... =firefox-a
This is not legal advice.
To help you in your decision making, I had a R180 in a 980kg 1600 with a 2.4 stroker running 210hp at the rear wheels with no diff problems [strength wise] in the 5 years that I had it.
Cheers
Cheers
Last edited by DNA Off Road on Sun Aug 19, 2007 3:49 pm, edited 1 time in total.
Stock 'Cruiser X 2
www.dnaoffroad.com.au
www.dnaoffroad.com.au
go to http://www.ozdat.com/forums and search!!!
there's quite a big thread on it, not much, modded half shaft's are about all that's needed from memory, no strength gains, just ratio's and a viscous(?) LSD
most wrecker's that have old jap car's will have an R200, but new tailshaft, half shaft's and some massaging of the boot are needed
Simon
there's quite a big thread on it, not much, modded half shaft's are about all that's needed from memory, no strength gains, just ratio's and a viscous(?) LSD
most wrecker's that have old jap car's will have an R200, but new tailshaft, half shaft's and some massaging of the boot are needed
Simon
Who is online
Users browsing this forum: No registered users and 130 guests