Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Couple of pics from Sunday (Gembrook)

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 21
Joined: Fri Jun 01, 2007 4:12 pm

Couple of pics from Sunday (Gembrook)

Post by G-Unit »

Finally decided to bite the bullet and get the 35's, even though some people said i couldn't fit them. Lucky i didn't listen to them, as i had a blast! Tyres were amazing compared to the sh!tty little 31's i had previously! (obviously). :)

Here's a few of my favourite pics from Sunday at Gembrook.

Image

Image
OH WHEELY?

Image

Image
RAWR!

Car has 3" Dobbinson springs and wombat shocks (42mm). Apart from that it's pretty standard. The 35's fit pretty easy. Clearance is tight in a couple of areas, probably about half an inch. The only scrubbing i get is in the back wheel arch, when it's at absolute full flex.

They *just* touch the top of the inside of the guard. It's not enough to stop the wheel from spinning so it's really not an issue. I put them through a pretty tough days out, and they were fine.

Down the track, i will get a 1" body lift just to help out, but really, you can get away with it pretty easily.

Cheers.
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

Nice one, bigger rubber helps a lot hey!

Glad you didn't listen and put them on, one thing you'll learn in this sport is be careful who you listen to for advice.

Cheers, Paul
Posts: 21
Joined: Fri Jun 01, 2007 4:12 pm

Post by G-Unit »

Yeah, i wouldn't advise people ignoring all advice. :P I was going to get the 35's no matter if they fit or not. If the didn't fit, then i would have made them fit, probably at a price. :)

Cheers
Post Reply

Who is online

Users browsing this forum: No registered users and 76 guests