Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

fitting 32x9.5 SImex pedes on 8 inch rim

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

fitting 32x9.5 SImex pedes on 8 inch rim

Post by dank »

i've current got 31x10.5 silvertstone tyres on 15x8 inch rims at the moment and I haven't had them pop a bead or anything even down to 10psi.

the simex 32x9.5 measure 10.5 inch in sectional width. Do you think I could get away with strapping these onto the 8 inch rims?

cheers
DAn
Last edited by dank on Fri Aug 24, 2007 4:25 pm, edited 1 time in total.
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Top
Posts: 70
Joined: Fri May 11, 2007 4:26 pm
Location: Central Coast, NSW

Post by Brainless »

i have 33x12.5's on 15x8's aint a big issue but i havnt run them low psi yet either
87 Hilux SingleCab Project - 3rz, 35's 3inch Spring, 3 inch Body, GB Lift
88 Ford Mav, 4inch Spring, 3inch Body
Top
Posts: 59
Joined: Fri Apr 20, 2007 3:11 pm
Location: Australia

Contact:
Contact Jam-Pony

Re: fitting 32x9.5 SImex pedes on 8 inch rim

Post by Jam-Pony »

dank wrote:i've current got 31x10.5 silvertstone tyres on 15x8 inch rims at the moment and I haven't had them pop a bead or anything even down to 10psi.

the simex 32x9.5 measure 10.5 inch in sectional width. Do you think I could get away with strapping these onto the 8 inch rims?

cheers
DAn
Yeah i ran a set of 32x9.5 simex's on 15x8's and had no dramas what so ever.
Rangie, injected 4.6L, 35's, 8274, HID's, 6pt Cage, F & R Lockers...

What else turns you on? Drugs? Casual sex? Rough sex? Casual rough sex? I'm a docter, i need to know.
Top
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

being a rangy did you ever run them under 10psi? as thats what i'll be running them at....if they were around 16 to 20 i would get no bagging on the zook.....
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Top
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

Post by UrbanRedneck »

Hey Dank if he can keep anything on the beads at even 16 on a rangie he is doin alright (remember the JTs 2 in one hit) :rofl:
You shouldnt have a problem at lower pressure either simply because you dont have the wieght behind it if you hit anything the same as there isnt enough wieght to bag them.
But knowing how you drive :twisted: anything is possible :rofl:

BTW looks like GQ diffs :cool:
have grinder will fit
www.4Bfabrications.com.au
Top
Posts: 59
Joined: Fri Apr 20, 2007 3:11 pm
Location: Australia

Contact:
Contact Jam-Pony

Post by Jam-Pony »

dank wrote:being a rangy did you ever run them under 10psi? as thats what i'll be running them at....if they were around 16 to 20 i would get no bagging on the zook.....
I didn't run them on my rangie, i ran them on my troopy and yeah i was running them pretty low on the beach with out beadlockers so i don't think you should have a problem.
Rangie, injected 4.6L, 35's, 8274, HID's, 6pt Cage, F & R Lockers...

What else turns you on? Drugs? Casual sex? Rough sex? Casual rough sex? I'm a docter, i need to know.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 129 guests