Maxxis Trepadors are another good choice. I swear by them.
LudaCris
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
What 37inch tyres to get
Moderators: toaddog, TWISTY, V8Patrol, Moderators
37s
Well just got home with 4 bf krawlers. Ended up buying em localy of a guy who used em once on a buggy then bought 39stickys.
So they are almost new.
Rims coming up early next week from Chris Hummer.
Will wait till next weekend to start chopping up the guards.
Next on the list will be some stronger cvs and transfer gears.
Denny
So they are almost new.
Rims coming up early next week from Chris Hummer.
Will wait till next weekend to start chopping up the guards.
Next on the list will be some stronger cvs and transfer gears.
Denny
R.I.P SILVER BULLET.
TOW RIG D4D 2011 LUX ON 33s. COMP RIG 95 SIGLE CAB LUX
SPONSORS EASTCOAST 4WD EASTSIDE AUTO KAR PRO TYRE AND AUTO
TECH ENGINEERING
TOW RIG D4D 2011 LUX ON 33s. COMP RIG 95 SIGLE CAB LUX
SPONSORS EASTCOAST 4WD EASTSIDE AUTO KAR PRO TYRE AND AUTO
TECH ENGINEERING
just wondering if you would know how they (M/T)compare puncture resistance wise to the krawler. Also is the 37x13.5x15 claw a true ''37''pigletracing wrote:pro comp were running the same carcae M/Thompson, Cooper
& Dick Ceepeck (basicly the carcases are out of the same stateside
factory) so as far as side wall protection they were much simular
but now Micky/T has gone to the next level of protection for sidewalls
by adding its new power cross ply configuration,the new angled plys add
extra protection from puntures that go between the vertical plys & thus
limits slicing or tearing damage
cheers
zac
37" Bias claws on a 10" rim @ 35psi measure just over 36.5" in my experience. I believe the bias claws in a 37 are no longer available, however.Zac Zec wrote: just wondering if you would know how they (M/T)compare puncture resistance wise to the krawler. Also is the 37x13.5x15 claw a true ''37''
cheers
zac
-Stu
No idea - I've only ever run bias and my car is far from winch challenge material! The bias would certainly be alot better in mud than the radials - most of the traction seems to come from the sidewall tread only found on the bias - that's all i can really offer!Zac Zec wrote:cheers mate.
sorry i forgot to put in there radial claw.
How do rekon they rate compared to the bias claw. from a winch challenge style car prospective.
Cheers
Zac
-Stu
Re: 37s
You wont be dissapointed. They are a great tyre.teambullet wrote:Well just got home with 4 bf krawlers. Ended up buying em localy of a guy who used em once on a buggy then bought 39stickys.
So they are almost new.
Rims coming up early next week from Chris Hummer.
Will wait till next weekend to start chopping up the guards.
Next on the list will be some stronger cvs and transfer gears.
Denny
ZAK-ZAK Ive winchcomped on both bias & radial claws,& yes bias have
deeper tread &side bites,(but OH SIGH) I to belive they have stoped
making 37 bias,but the side bites on 37 radial clawsare twice as deep as
35 rad claws..& the 37" radial side bites are deeper than procomp & BFG
crawler,roughly about the same depth as maxis.AS FOR COMPIN I have
found radials better than bias in some aspects.BUT ASFOR PUNCHERS
the sticks at the O-B-C didnt care what they put holes in,,,& I dont know
if it was just good luck but I saw a rig with maxis come out of a padock
intact where a lot of others didnt,
.....so in a way you could toss a coin.....
deeper tread &side bites,(but OH SIGH) I to belive they have stoped
making 37 bias,but the side bites on 37 radial clawsare twice as deep as
35 rad claws..& the 37" radial side bites are deeper than procomp & BFG
crawler,roughly about the same depth as maxis.AS FOR COMPIN I have
found radials better than bias in some aspects.BUT ASFOR PUNCHERS
the sticks at the O-B-C didnt care what they put holes in,,,& I dont know
if it was just good luck but I saw a rig with maxis come out of a padock
intact where a lot of others didnt,
.....so in a way you could toss a coin.....
Who is online
Users browsing this forum: No registered users and 3 guests