Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
G'day all,
I'm after a PTO unit to drive my Thomas winch via an LT95 gearbox/txcase, I'll take it with or without the shaft(s). Does anyone on forum know of, or have one of these, that they can spare?. Thanks.....
We must have been lucky than, picked one up on ebay for i think it was $400 with everything including shafts, winch cradle, bullbar to suit pto, trans drive unit, actual winch and cable, all nuts and bolts etc
I've seen a couple in the paper up here over the past few years, but normally you've got to buy a Rangie with them . If only they came with a TRB LT95......
1103.9TD wrote:I've seen a couple in the paper up here over the past few years, but normally you've got to buy a Rangie with them . If only they came with a TRB LT95......
Ya dont want much do ya
Cheers
Chris
Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Gday guys
Be careful when you are buying these pto's as the rangie and 110/stage1 versions are quite different, its very hard to fit a rangie one to a 110 without cutting the floor. Sure the gearbox is the same but the pto had different orientation and different distance between input and output centres. Think I have a pic somewhere of the two types next to each other if you're really keen.
.
