Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ Q's

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 43
Joined: Tue Mar 13, 2007 7:29 pm
Location: Melbourne

GQ Q's

Post by santaz351 »

Hi all
I've decided to leave the toyota camp and get into a nissan. I'm in the market for a manual deisel GQ SWB or LWB and just had a few questions that i wanted answered.
1. What are the differences, if any, between Patrols and Mavericks?
2. What things should i be looking out for/known issues
3.How much lift will i need to run 33"/35"?
4. Are parts easy to get for it?

Thanks in advance
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: GQ Q's

Post by bogged »

santaz351 wrote:1. What are the differences, if any, between Patrols and Mavericks?
rebadged GQs' - few little things, but nothing worth writing home about.
2. What things should i be looking out for/known issues
http://www.gqpatrol.com/buyingagq.htm
3.How much lift will i need to run 33"/35"?
2-3inch sus/2in body.
4. Are parts easy to get for it?
wat parts?
Posts: 43
Joined: Tue Mar 13, 2007 7:29 pm
Location: Melbourne

Post by santaz351 »

Just parts in general. I mean, can you get most most parts from a wreckers or do you have to buy genuine from nissan all the time
Posts: 297
Joined: Wed Jul 12, 2006 6:32 pm
Location: cranbourne, vic

Re: GQ Q's

Post by g60boy »

santaz351 wrote:2. What things should i be looking out for/known issues
rust!!!!... in the bottom of doors, sill's, body mounts, lower A pillars around the door hinges (also check for cracks in this area behind the front guards), around rear roof gutters and pillars. late 88 - early 89 models where none to rust easly.

i always say, if the clock doesnt work, she's a keeper. because every good gq ive looked at to buy the clock never worked, but all the bodgey car yard ones did :lol: .

parts are easy to get genuine, but there is sh!t loads of after market stuff now days.
mq shorty, black, rust free!!, quarter chop, F&R tube bars and sliders, q78's or 33'' stt's, 4.88's with lsd waiting to be thrown in.. :D http://www.patrol4x4.com/forum/showthread.php?t=9540
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Re: GQ Q's

Post by Nelso »

santaz351 wrote: 3.How much lift will i need to run 33"/35"?
2 to 3" spring lift with bump stop extensions.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Posts: 158
Joined: Fri Feb 16, 2007 9:40 pm
Location: Brissy

Post by ROGQ »

one with an engine build date pre august 93 ( i think ) stronger pistons and are suited to turbos better.
Posts: 853
Joined: Fri Feb 10, 2006 6:38 pm
Location: Newcastle

Post by Mick. »

santaz351 wrote:Just parts in general. I mean, can you get most most parts from a wreckers or do you have to buy genuine from nissan all the time
Genuine parts are reasonable priced most of the time. I very rarely buy aftermarket.

Cheers Mick.
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

Post by Mousie »

rust?
were talking about a GQ not a mk/mq
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Posts: 297
Joined: Wed Jul 12, 2006 6:32 pm
Location: cranbourne, vic

Post by g60boy »

Mousie wrote:rust?
were talking about a GQ not a mk/mq
if i was talking about mq's, the list would be 4 pages long :lol:
mq shorty, black, rust free!!, quarter chop, F&R tube bars and sliders, q78's or 33'' stt's, 4.88's with lsd waiting to be thrown in.. :D http://www.patrol4x4.com/forum/showthread.php?t=9540
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest