Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Round thing under disco

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 162
Joined: Mon Apr 14, 2003 12:23 am
Location: Canberra

Round thing under disco

Post by suzidisco »

Can someone tell me what the round thing is attached to the front diff next to the streering damper. what is it for and does it matter if you remove it.
Top
Posts: 142
Joined: Mon Nov 10, 2003 6:36 pm
Location: Vic

Post by Rovernaut »

What the big Rubber thingy with the wire on one side?
I think it's a damper of some sort. maybe it stops your axle falling off on extreme articulation?
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

pictures will tell a thousand words
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

Its called the "Harmonic Balancer", I took mine off a couple of years ago without any negative effect. My DD Disco still has one though...will keep that on it...exceeding 160 km/h regularly, and I need all the balancing I can get
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

Like DiscoDino said its "Harmonic Balancer" HSE use then Disco's use them. It's used to take any vibration out of the drive line.... Or something to loose if you use it off road :)
TD5 96 Discovery UTE.
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Mate of mine tore his off while in the Wanangatta.

Was a bit vibro on the way home but nothing dramatic.
KRiS
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

I removed mine off a 2" lifted 3.9 V8 Disco and have driven 10,000ks at various speeds with no noticeable effect/difference.
The balancer is cast iron, the rubber mount looks the same as a V8engine mount, so 0ne spare still att to vehicle if needed.
Also if you have headers fitted they may contact balancer under susp compression another reason to remove.

bazzle
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest