Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
tyre size
Moderator: Tiny
Assuming its a Feroza, about the biggest that is reasonably easy to fit are 31x10.5 - usually on 15" rims.
You do have to wind the front bars up almost all the way ( no droop travel ), chuck the front mud flaps, and if your rears are stuffed then that might be an issue. As droop travel is already an issue with Feroza's this isn't the ideal solution - but its quick and easy and to solve it properly is a very big job.
Depending on the actual tyre diameter ( a 31 could be bigger or smaller depending on the brand ) they can also touch the inner guards at full bump, which if used hard will crack the body. Bump stop spacers will fix this.
And... this is the real issue, you gear ratios will be even worse than they are stock. If you are serious in your offroading then THINK VERY CAREFULLY. If its more fore looks ( and thats fime by me ) then 31's
You do have to wind the front bars up almost all the way ( no droop travel ), chuck the front mud flaps, and if your rears are stuffed then that might be an issue. As droop travel is already an issue with Feroza's this isn't the ideal solution - but its quick and easy and to solve it properly is a very big job.
Depending on the actual tyre diameter ( a 31 could be bigger or smaller depending on the brand ) they can also touch the inner guards at full bump, which if used hard will crack the body. Bump stop spacers will fix this.
And... this is the real issue, you gear ratios will be even worse than they are stock. If you are serious in your offroading then THINK VERY CAREFULLY. If its more fore looks ( and thats fime by me ) then 31's
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
I run 235x75xR15 good years they are about the biggest that i would want to go for a do a bit of highway driving and its just not nice to be pushing anything any bigger than that. And as mighty mouse says you will be starting to run into other bigger problems if you are wanting to go off road.
Chris
Chris
Forum Administrator of 4x4 Play FNQ
Please Visit us at [url=http://www.4x4playfnq.com]4x4 Play FNQ[/url]
Please Visit us at [url=http://www.4x4playfnq.com]4x4 Play FNQ[/url]
I see you are from holland. Try malatesta tyres from italy
http://www.malatesta.it
Good tyres for feroza are mlatesta kobra or kaiman
kobra
kaiman
Price for one tyre kobra or kaiman in 195R15 (195/82/15) is 65 EURO.
http://www.malatesta.it
Good tyres for feroza are mlatesta kobra or kaiman
kobra
kaiman
Price for one tyre kobra or kaiman in 195R15 (195/82/15) is 65 EURO.
I do not need sex, the government fucks me every day!
I find the car bible webpages are good for size information like this. Check the calculator about 1/4 of the way down the page.
http://www.carbibles.com/tyre_bible.html
http://www.carbibles.com/tyre_bible.html
http://www.bushranger.com.au/
'84 F70 Rocky :)
'97 Paj GLS LWB - HEHE
RIP ... My Feroza II SXP
'84 F70 Rocky :)
'97 Paj GLS LWB - HEHE
RIP ... My Feroza II SXP
The top one is a remould based on the tread design of a Yokohama Geolandar MT and the bottom one is a straight rip off of a centipede (which you can buy here in a remould as a mongrel)guido1985 wrote:out of curriosity does anyone know if they make a tyre that looks similar to theese in australia or are theese available in Aus??
Chris
There are some very lax rules on copyright of tread designs in Europe and there are lots of copy remoulds available - like the mongrel here.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
ok thanks for that i have done a bit more reading found a really good swamper the only concern that i have now is that i am going to get really really bogged. Like a mate told me had a blitz got it stuck put swampers on then got stuck worse so put on winch got stuck again and worse the story goes on got to draw a line. Thanks though guys for your time and information.
Chris
Chris
Forum Administrator of 4x4 Play FNQ
Please Visit us at [url=http://www.4x4playfnq.com]4x4 Play FNQ[/url]
Please Visit us at [url=http://www.4x4playfnq.com]4x4 Play FNQ[/url]
Hello manus, i have small 33" tyres on a original Rocky, but with suspensionlift and bodylift is a width 33" also possible. We had also a Rocky with suspensionlift and no bodylift but we cut the fenders a bit, and there are 35" tyres on it. I am sure that with your suspensionlift and your bodylift the 35" tyres will fitt also, but with high flex it is possible that they rub a bit. Check out my site for pics of these Rocky's: www.gonzo4x4.be
Or come over one day and you could try the tyres on your car.
Regards from Belgium
Or come over one day and you could try the tyres on your car.
Regards from Belgium
Daihatsu F50 with 37" Simex tyres for battle
Daihatsu Rocky with 33" Blackstar tyres for normal off-road and daily drive
Daihatsu Rocky with 33" Blackstar tyres for normal off-road and daily drive
Who is online
Users browsing this forum: No registered users and 12 guests