I am need of a new clutch the last one was installed with new motor at acost of $800 and has lsted less than 2 years what is a resonable price to expect to pay for a new clutch kit. Mate just bought one for hilux $250..
any thoughts
cheers eddy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3.5 v6 clutch
Moderator: -Scott-
Recently replaced the clutch in my NJ TDI (original, 365000km!!!!).
Yours will have the same gearbox and I assume the clutches will be similar if not the same.
Yours will probably have a duel mass flywheel though, recommended to be replaced with the clutch.
The DM flywheel is where the big dollars are.
My clutch kit (a good quality Japanese Exedy/Daikin unit) cost me about $800 dollars trade (fitted my self).
A "cheap" PBR unit was about $1500 retail. After hearing that I didn't ask for a trade price, thought it would still be too dear (why do big ticket items always go "putt" when funds are tight).
Surprisingly genuine items (clutch plate, pressure plate and thrust bearing) only added up to about $850 - $900 trade, cheaper than a PBR unit.
Maybe investigate the possibilty of sourcing a 2nd hand solid flywheel, the increased NVH over the DM unit may be hard to pick up in these vehicles now they have quite a few ks on them, although I have never driven a vehicle with a dual mass flywheel to notice the difference anyway.
Peter H
Yours will have the same gearbox and I assume the clutches will be similar if not the same.
Yours will probably have a duel mass flywheel though, recommended to be replaced with the clutch.
The DM flywheel is where the big dollars are.
My clutch kit (a good quality Japanese Exedy/Daikin unit) cost me about $800 dollars trade (fitted my self).
A "cheap" PBR unit was about $1500 retail. After hearing that I didn't ask for a trade price, thought it would still be too dear (why do big ticket items always go "putt" when funds are tight).
Surprisingly genuine items (clutch plate, pressure plate and thrust bearing) only added up to about $850 - $900 trade, cheaper than a PBR unit.
Maybe investigate the possibilty of sourcing a 2nd hand solid flywheel, the increased NVH over the DM unit may be hard to pick up in these vehicles now they have quite a few ks on them, although I have never driven a vehicle with a dual mass flywheel to notice the difference anyway.
Peter H
NJ Pajero 2.8TDI
Who is online
Users browsing this forum: No registered users and 9 guests