Hey there mate i have just done a 80series rear and patrol front diff conversion and was just wondering when you did both your conversions did you use the same offset rims on both setups or did one require different to the other.
Also were they standard offsets or a custom?
I am wanting to run a 15x10 so as my creepys fit them properly but if off the shelf 15x8 will fit then i guess the same in a 15x10 should.(i hope)
Thanx in advance Damo
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
After Maggot4x4's assistance
Moderator: Micka
After Maggot4x4's assistance
have grinder will fit
www.4Bfabrications.com.au
www.4Bfabrications.com.au
The GQ end is easy, I have run everything on them pretty much.
On the 80's, I have only run 16" GUII alloys so I can't really comment. Patrol have less offset than 80 rims, my alloys keep 315x75x16 under the flares, the GQ rims sat about1/2 inch outside.
On the 80's, I have only run 16" GUII alloys so I can't really comment. Patrol have less offset than 80 rims, my alloys keep 315x75x16 under the flares, the GQ rims sat about1/2 inch outside.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Who is online
Users browsing this forum: No registered users and 0 guests