hey guys just got a set of 33 inch bighorns for my car. well their in my garage atm, get fitted on friday. just woundering if i will have any guard scrubing problems. ive got 2 inch efs suspension lift and a 2 inch body lift. the front is really only 1 inch lifted so that it dosent affect the little travel i have, as much. any info would be greatly appreciated thanks.
joey2389
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
33s under ifs 4 runner
Moderators: toaddog, Elmo, DUDELUX
Depending on how wide the tyres are they may scrub a little.
I have 2" sus and 2" body lifts on the same vehicle and run 33" x 12 1/2" claws, they only ever scrub when in reverse at full lock and on uneven ground. Even then they only just touch one of the bolt heads that hold the front mud flap on.
Should be fine
Maybe you will have to dial the front up that extra 1/2" to 1" maybe not.
Cheers
I have 2" sus and 2" body lifts on the same vehicle and run 33" x 12 1/2" claws, they only ever scrub when in reverse at full lock and on uneven ground. Even then they only just touch one of the bolt heads that hold the front mud flap on.
Should be fine
Maybe you will have to dial the front up that extra 1/2" to 1" maybe not.
Cheers
Claws are notoriously short though.Struth wrote:Depending on how wide the tyres are they may scrub a little.
I have 2" sus and 2" body lifts on the same vehicle and run 33" x 12 1/2" claws, they only ever scrub when in reverse at full lock and on uneven ground. Even then they only just touch one of the bolt heads that hold the front mud flap on.
Should be fine
Maybe you will have to dial the front up that extra 1/2" to 1" maybe not.
Cheers
I will go and measure one and get back with an honest measurement.love_mud wrote:Claws are notoriously short though.Struth wrote:Depending on how wide the tyres are they may scrub a little.
I have 2" sus and 2" body lifts on the same vehicle and run 33" x 12 1/2" claws, they only ever scrub when in reverse at full lock and on uneven ground. Even then they only just touch one of the bolt heads that hold the front mud flap on.
Should be fine
Maybe you will have to dial the front up that extra 1/2" to 1" maybe not.
Cheers
Cheers
mesured up the big horns exaxtly 33 inches on the button. they have a 50/50 chance of scrubbing. if they do scrub a grinder and a ball point hammer will fix it. prob wont need to widen wheel arch, just take a bit out on the inside of the guard which wont stand out. hopefully. i will post up a pic how it looks like now and 2morrow afternoon when tha tyres are on. thanks for your help. joey2389 cheers!
they wont scrub, if they dont scrub driving norm i doubt they will anywhere else purely cuz of the fact your front dsent flex- 
Who is online
Users browsing this forum: No registered users and 2 guests