Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Painting question

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Painting question

Post by CWBYUP »

Going the paint the camper trailernext weekend and I was reading on the Hammertone KillRust label and it just said when spraying thin Spareingly?

Has anyone used this stuff before ?

Has you got and idea on mixing ratio's.

Just dont want to F up painting it as it needs to be ready for willowglen.

Cheers Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Top
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Contact:
Contact Pinball

Post by Pinball »

Have a read through the "Chroming" series starting at;

http://www.pointnshoot.org/modules.php? ... =0&thold=0

not hammertone, but we used killrust.. takes a fair hiding, particularly from flying recovery points! :shock:

Spock
www.pointnshoot.org
Suzuki Auto Spares Springwood
Century Batteries
Sylverkey
Extreme Coatings
Control Synergy
Top
Posts: 300
Joined: Sun May 20, 2007 2:22 am
Location: Toowoomba QLD

Post by 90Mav »

i would think 'thin sparingly' would be around 10% thinners... just try it, if you can spray it ok its thin enough.. if you over thin it, it will probably loose the hammertone effect.
Thrashed '90 Leaf spring Maverick ute, TD42, 2" EFS lift. 36 Swampers.
Top
Posts: 116
Joined: Fri Feb 02, 2007 4:46 pm
Location: maryborough QLD

Post by nisson35 »

mate i would mix it bout 20 % andf see how it sprays its usually around that for an enamel, also you can get an activator which will help the paint cure.

check with you local paint place about the activator
YOU CAN FOLLOW ME BUT ITS GUNNA HURT!!
Top
Posts: 26
Joined: Tue Jul 04, 2006 8:12 pm
Location: sydney

Post by Da Danga »

nick just mix it till its workable trust me i use this shit all the time if u need a hand give me a buz!!! jeremy
gq duel fuel with BBM 4 inch and 2 inch body lift 35in muddies and rear air locker
Top
Posts: 108
Joined: Sat May 05, 2007 8:06 pm
Location: Beaconsfield/Vic

Contact:
Contact Cruza62

paint

Post by Cruza62 »

get POR 15 amazing stuff....(Type it into google)
62 was Petrol, now 12ht ! Body lift, lockers, spring lift, reverse offset rocrawler...? rims, NO RUST, some more stufffff....
Top
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Post by CWBYUP »

Thanks for al the help guys, Hopefully its nice and sunny this weekend.

I may take you up on that Jeremy, You sold your truck yet ?

Cheers Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Most , not all mammertones need a laquer thinner and don't like being sprayed onto a cold surface as they bloom and run. You will need multiple thin coats of hammertone to build up descent coverage , best done on a warm day in the sun , and use a etch primer , the better one's are two part etch primer. The laquer thinner makes the paint go off really quick , good luck , Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest