Rancho in cab air pressures

Post by **LAIN_63** » Wed Sep 19, 2007 5:49 pm

Just a quick one,
I have killed a rancho compressor and was wondering if anyone knows what psi the shocks run at full pressure. I am planning on using my locker
pump but not sure if 100psi will do it.

Cheers
Lain

Post by **BASSYK** » Wed Sep 19, 2007 9:27 pm

i have pulled apart one of the incab compressors and they are very similar to the ARB Locker only compressors which only pump up to 100 PSI

Post by **udm** » Wed Sep 19, 2007 10:08 pm

i was once told by 4waysuspension that they run at about 150psi, i wouldnt have a clue if its true though.

Post by **LAIN_63** » Thu Sep 20, 2007 7:25 pm

Cheers for the help.
I rang up 4wd1 today and they told me that 100 pound would be way too much.
think I might just have to put a guage in line with the ranco ones and see what the equivilent psi is when it says "9" on the incab

Cheers
Lain

Post by **udm** » Thu Sep 20, 2007 7:32 pm

ok then... and dont forget to let us know the pressures it works at

Outer Limits 4x4 Board

Rancho in cab air pressures

Rancho in cab air pressures

Who is online