I want to get the front end on the 80 to work like the rear. I dont want to go 5 link front end (thats at least 18 months away!), but i would like to know if there are any softer or "different" bushes out there that will allow more rotation?? At the moment, the bushes in it are just bout fucked, so they need to be done anyway....
Ideas all??
Phill
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 series 3 link front end
Moderators: toaddog, Elmo, DUDELUX
80 series 3 link front end
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
making an 80 flex
Some guys I know take one of the bolts out of the front of the control arms on each side to give a bit more flex. I've never been game to try it but then again I also still run swaybars.
I have always found that the front of my 80 flexes enough and when it don't..... Well that's what lockers are for isnt it.
I have always found that the front of my 80 flexes enough and when it don't..... Well that's what lockers are for isnt it.
Its got 5" king springs in it, and caster correction plates on it, and no swaybars. I might see iff i can get a pair of 20-25% softer springs for it, and see how it goes
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
Have alook in the rover section as STRANGE ROVER is now doin slotted bushes for discos and the like and apparently he is goin to do nissan and cruiser ones to ..........but they are still way of -production yet ...........................
Good amount of extra flex in stranges disco though could be the go for the 80
Good amount of extra flex in stranges disco though could be the go for the 80
[b][i] DAN [/i] [/b]
:silly:
:silly:
if you take both the front bolts out you are relying on the panhard rod bushes for axle wrap control, which is almost the same as no axle wrap control. just pulling one bolt total (ie leave 3 in) will yield a fair bit of flex in the front without compromising axle wrap control, and it only takes 30 seconds to put the bolt back in when you go back on the road.
personally I like not having too much flex in the front, it adds a bit of control and makes for awesome wheel-up photos
personally I like not having too much flex in the front, it adds a bit of control and makes for awesome wheel-up photos
dow50r wrote:I would try just one bolt on one side, (probably a front one) and try it out.
Keep the Toyota bushes and slot the holes if you need caster correction, and you will keep articulation at its best.
Andrew
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...
dumbdunce wrote:if you take both the front bolts out you are relying on the panhard rod bushes for axle wrap control, which is almost the same as no axle wrap control. just pulling one bolt total (ie leave 3 in) will yield a fair bit of flex in the front without compromising axle wrap control, and it only takes 30 seconds to put the bolt back in when you go back on the road.
personally I like not having too much flex in the front, it adds a bit of control and makes for awesome wheel-up photosdow50r wrote:I would try just one bolt on one side, (probably a front one) and try it out.
Keep the Toyota bushes and slot the holes if you need caster correction, and you will keep articulation at its best.
Andrew
Remove the passenger side one if you experiment with this, the drivers side should remain strong as it is closest to the torque drive portion (diff pumpkin) and will reduce the torque action on the long side of the diff housing.
Built, not bought.
dumbdunce wrote:if you take both the front bolts out you are relying on the panhard rod bushes for axle wrap control, which is almost the same as no axle wrap control. just pulling one bolt total (ie leave 3 in) will yield a fair bit of flex in the front without compromising axle wrap control, and it only takes 30 seconds to put the bolt back in when you go back on the road.
personally I like not having too much flex in the front, it adds a bit of control and makes for awesome wheel-up photosdow50r wrote:I would try just one bolt on one side, (probably a front one) and try it out.
Keep the Toyota bushes and slot the holes if you need caster correction, and you will keep articulation at its best.
Andrew
holy crap imagine it under heavy throttle or braking, with half the bolts that locate the front diff missing !!
hands and mums dont count!!!
yeah but fark it would flex for a no cost mod ........
Slowhilux, you should have a chat with V8Diesel (Matt) from Kowari motors, Townsville.
He was telling me about a Patrol/Cruiser ??? that had some kind of flex joint, maybe something similar to a jonny joint.
Doesn't come here much but Jake could get hold of him.
He was telling me about a Patrol/Cruiser ??? that had some kind of flex joint, maybe something similar to a jonny joint.
Doesn't come here much but Jake could get hold of him.
GXL Turbo Diesel 80 series- 6" King springs + Rancho in-cab kit- 35" BFG Muds Twin ARB airlockers.
Ive seen an excellent easy way to make a 4 link. Imagine a raised bracket above the diff pumpkin with an 80 rear lower control arm bolted to it, and facing rearward to the inside of the chassis above the driveshaft.
You then take out the front bolts of the lower control arms.
Get back under there and dream....
Andrew
You then take out the front bolts of the lower control arms.
Get back under there and dream....
Andrew
4 links isn't enough for the front, with only one upper link (and assuming the two lower links retain only one bolt each) as you describe the axle has a sort of half degree of freedom which is hard to describe - imagine the lin-over-the-diff is actually right in the middle, makes it easier to visualise - now on articulation of under steering loads, the wheel that moves UP also moves FORWARD a little - the panhard rod provides no thrust support, only lateral, and the single upper link does not stop the 'top' of the axle rotating relative to the vehicle thrust axis. this is similar to the rear-steer that is seen in rear 3-link setups, which is allowable on-road as onroad articulation is normally very slight, and allowable off-road since you're usually going very slowly when the flex is big enough to make the steer noticable. on the front however, where steering happens, axle location must retain the axle rigidly perpendicular (or close to) the thrust axis to prevent bump steer and especially sway/lean steer, or you can end up with a vehicle that either ADDS steering the harder you push it into a corner, leading to a feedback situation which can be scary at best and deadly at worst (tweak steering wheel 1/32 turn at highway speed, end up facing the way you just came from!), or one that SUBTRACTS steering, so you have to over-control, and the faster you're going the more extra control you have to put in to compensate for the "sway-antisteer" - and as you straighten up and the vehicle sways a little bit the other way it will suddenly want to steer back the way it was just turning - scary stuff.
probably wouldn't be a problem if you were building a trails-only buggy type setup, but for something that works on the road you really need that 5th link.
I will be spending plenty of time under the 80 today, I have an oil spill to clean up (note: DO NOT start filling sump until AFTER YOU REPLACE THE OIL LEVEL SENSOR!!!! 4+ litres of oil makes a BIG slick). thank god for kitty litter.
probably wouldn't be a problem if you were building a trails-only buggy type setup, but for something that works on the road you really need that 5th link.
I will be spending plenty of time under the 80 today, I have an oil spill to clean up (note: DO NOT start filling sump until AFTER YOU REPLACE THE OIL LEVEL SENSOR!!!! 4+ litres of oil makes a BIG slick). thank god for kitty litter.
what sort of $ is a 5 link kit? who's selling them? is there a bolt-on or do they all require welding? (don't mind welding, but prefer to be able to return it to stock configuration without too much drama if it ever needs.
don't have a cat. there used to be one that hung around the yard until we got a dog... maybe the dog ate it!
amazing how much oil that kitty litter will soak up, I spilled easily 5 litres and it's all dry now!
also my turbo install is complete
don't have a cat. there used to be one that hung around the yard until we got a dog... maybe the dog ate it!
amazing how much oil that kitty litter will soak up, I spilled easily 5 litres and it's all dry now!
also my turbo install is complete
Who is online
Users browsing this forum: No registered users and 0 guests