Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 series clutch problem

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1391
Joined: Fri Aug 13, 2004 9:42 pm
Location: Newy

60 series clutch problem

Post by Pyrotech »

i went to move my 60 today, and when i put my foot on the clutch it went straight to the floor, no resistance what so ever.

when the car is stationary i can select gears by mashing the stick, and it will start in gear and move the car, but still not clutch.

can anyone please help me shed some light on this and a possible solution

Pyro
Zooks are for people that aren't afraid of angles and who have nothing to compensate for

[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Checked clutch fluid? If its full get someone to press the clutch pedal while you watch to see if the clutch slave is moving the fork. Might need a bleed but chances are you have a leak so you will have to replace master or slave or both. Not expensive anyway and very easy to do.
Top
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Post by midi73 »

RAY185 wrote:Checked clutch fluid? If its full get someone to press the clutch pedal while you watch to see if the clutch slave is moving the fork. Might need a bleed but chances are you have a leak so you will have to replace master or slave or both. Not expensive anyway and very easy to do.
Yep. What he said.
Top
Posts: 567
Joined: Fri Jul 20, 2007 7:37 am
Location: Panama

Contact:
Contact Tapage

Post by Tapage »

Bleed the system .. but I wil replace both just for peace of mind .. easy job anycase ..
HJ-60 2H-T Intercoled [url=http://4x4panama.com/foros/viewtopic.php?t=2770]Tencha[/url]
HDJ-80 1HD-T Stock so far " Marilu "
Panama
Top
Posts: 1391
Joined: Fri Aug 13, 2004 9:42 pm
Location: Newy

dsf

Post by Pyrotech »

hey guys thanks for you help.

i bled the system last night, but still have nothing at the pedel, so i will be replaceing both as soon as i get a free moment
Zooks are for people that aren't afraid of angles and who have nothing to compensate for

[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
Top
Posts: 422
Joined: Wed Nov 22, 2006 1:47 pm
Location: surf coast, victoria

Post by cruiser60series »

same thing recently. The piston in the master had rusted fixed to the far end of the cylinder, from not being used for ages.

new master and all good.
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest