Hi all,
Under the paj on the weekend giving it a check over and noticed that the rear propshaft has some vertical movement at the transfere case end. The uni joints are fine, just seems 'loose' on the spline.
Are they supposed to have some float in them, or should it be nice and solid on the spline?
Cheers
cookie monster
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Propshaft problem ?
Moderator: -Scott-
Propshaft problem ?
99 GU Patrol Wagon 4.2td
Gday All
Was about to post a similar question when i came across this one. I've a 01 NM GLX and when taking off in 1st or when low revs in a higher gear, i get this grinding/vibration, i've read a little about the carbon fibre prop shafts, but wondering if anyone can help or shead light one this.
Regards to All
Was about to post a similar question when i came across this one. I've a 01 NM GLX and when taking off in 1st or when low revs in a higher gear, i get this grinding/vibration, i've read a little about the carbon fibre prop shafts, but wondering if anyone can help or shead light one this.
Regards to All
Who is online
Users browsing this forum: No registered users and 0 guests