Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rattle sound in gears

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

rattle sound in gears

Post by macca81 »

last couple of days(funnily enough the same timespan as the handbrake issue in another thread) ive occasionaly heard a loud, and i mean really loud, rattling sound thats sounds like its comming from the front of the gearbox or the bellhousing. only lasts a cpl of seconds then usualy goes away, but when its there i cant put it into any gears, but can leave it in gear and it still drives(altho its not a nice feeling to drive it when its happening.
had to pull over a few times coz i couldnt get it into gear, so had to sit on the side of the road waiting and wondering.
noise is louder when revs are higher also.




just realised that thinking back i dont think its happend to me over 60kph either...

any ideas?

cheers guys
Macca
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

the nut on the back of the mainshaft in the transfer has probably come undone. This happened to the MQ 4spd in my Landy Hybrid. It eats into the back of the case then evenualy locks up the gearbox. In my case in a bog hole almost on my side at night, with winch cable tight and flat batteries.

There is a plate on the back of the case you can undo and check.
:rofl: :popcorn: :snipersmile:
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

cheers mate, ill sus that out
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

well i found the plate, and i got the bolts out, but be damned if i could get the plate off... i think its time to take to a mech to have a looksee.... damn i hate it when its not something i can do myself :bad-words:
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

macca81 wrote:well i found the plate, and i got the bolts out, but be damned if i could get the plate off... i think its time to take to a mech to have a looksee.... damn i hate it when its not something i can do myself :bad-words:
The nut has probably driven itself into the plate.
:rofl: :popcorn: :snipersmile:
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest