hi all i just bought a hilux will air lockers when the locker is on it is leaking out of the diff breather can anyone tell me whats wrong with it
cheers matt
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
front airlocker leaking
Moderators: toaddog, TWISTY, V8Patrol, Moderators
front airlocker leaking
Offering a service for General welding, parts and suspension kit install, modification such as spring over axle, Solid axle swaps etc
sik_toys@hotmail.com
sik_toys@hotmail.com
The air line inside the diff must be damaged. The air being pumped into the diff will now be filling the whole diff housing and escaping throught the weekest point... your breather.
T.L. 93 80 4.5 GXL Man
Gigglepin winch, beadlocked 37x12.5-17 sticky treps, flip arm, high steer, 6" dobinsons, 33" boss's, longfields, 4.56 diffs, 25% low range, lockers
Team: Cause For Concern
Gigglepin winch, beadlocked 37x12.5-17 sticky treps, flip arm, high steer, 6" dobinsons, 33" boss's, longfields, 4.56 diffs, 25% low range, lockers
Team: Cause For Concern
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
could be a few things, the copper line inside has a hole warn in it... diff needs to come out and solder the line and move it away from whatever wore the hole in it.
the seal housing could be worn so the o rings arent sealing... diff needs to come out new seal housing is $52 from arb but will have to wait 2 or 3 weeks for them to make. (if its the old 3 hole bolt down one, or will have at kilsyth if its the new clip on floating jobbie.)
the o rings might have failed.. diff needs to come out. o rings are cheap about a dollar each.
locker could have been removed as above.. unlikely but will cost you a new locker to fix!
anyway if you can remove the hibs/diff yourself and get it on a bench it wont cost much to fix, you dont pull the centre out of the housing so you dont need to set the crownwheel/pinion relationship back up.
cheers
cam
the seal housing could be worn so the o rings arent sealing... diff needs to come out new seal housing is $52 from arb but will have to wait 2 or 3 weeks for them to make. (if its the old 3 hole bolt down one, or will have at kilsyth if its the new clip on floating jobbie.)
the o rings might have failed.. diff needs to come out. o rings are cheap about a dollar each.
locker could have been removed as above.. unlikely but will cost you a new locker to fix!
anyway if you can remove the hibs/diff yourself and get it on a bench it wont cost much to fix, you dont pull the centre out of the housing so you dont need to set the crownwheel/pinion relationship back up.
cheers
cam
[quote="75 cruser"]we want more donkey[/quote]
Who is online
Users browsing this forum: No registered users and 0 guests