Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Tow Vehicle for around 3000kg +
Moderators: toaddog, TWISTY, V8Patrol, Moderators
I agree with the truck suggestion - its the safe and professional way to do it. If you cant find a beaver tail, there are PLENTY of good flat bed trucks in this price range which can be easily converted to beaver tail. Sell the car trailer.Evil 73 wrote:You can get a small tilt tray or beaver tail for the money you want to spend, screw the trailer idea, if you want to do long k's buy a truck and don't piss around with poor fuel consumption and potential overloading of the vehicle in which you plan to tow the monstrosity with.
Have you heard of rolling resistance, the more wheels and weight on the ground the more energy is needed to propel the vehicle, plus you have wear and tear on another 4+ tyres and breaks and wheel bearings etc.
With a vehicle of the f100's weight a truck is your only option, also looking at you pics of the yellow thing you also have width to consider, you won't even fit that on a conventional car tandem without changing wheels all the time, that sux.
I have this same problem of width with my vehicle the trailer i use is alsmost 2.5m wide just on the legal limit for australian roads and you have to drive over the gaurds, but my advantage here is my truck only weighs 1800 kg max
Ben
2nd option is using a truck as a tow vehicle for your car trailer - longer wheelbase and extra weight of the prime mover is far safer for towing these sorts of loads than any 4WD ever will be.
A truck has a max width of 2,5m alsoMark2 wrote:I agree with the truck suggestion - its the safe and professional way to do it. If you cant find a beaver tail, there are PLENTY of good flat bed trucks in this price range which can be easily converted to beaver tail. Sell the car trailer.Evil 73 wrote:You can get a small tilt tray or beaver tail for the money you want to spend, screw the trailer idea, if you want to do long k's buy a truck and don't piss around with poor fuel consumption and potential overloading of the vehicle in which you plan to tow the monstrosity with.
Have you heard of rolling resistance, the more wheels and weight on the ground the more energy is needed to propel the vehicle, plus you have wear and tear on another 4+ tyres and breaks and wheel bearings etc.
With a vehicle of the f100's weight a truck is your only option, also looking at you pics of the yellow thing you also have width to consider, you won't even fit that on a conventional car tandem without changing wheels all the time, that sux.
I have this same problem of width with my vehicle the trailer i use is alsmost 2.5m wide just on the legal limit for australian roads and you have to drive over the gaurds, but my advantage here is my truck only weighs 1800 kg max
Ben
2nd option is using a truck as a tow vehicle for your car trailer - longer wheelbase and extra weight of the prime mover is far safer for towing these sorts of loads than any 4WD ever will be.
I looked into a truck a few years ago and decided against it, with the price of rego, tyres and fuel. The only way i could justify it is if i could make the truck money.
Supported By
Milanco
Phones N Alarms
Buds Customs
Milanco
Phones N Alarms
Buds Customs
http://cgi.ebay.com.au/STEYR-PUCH-PINZG ... dZViewItem
i know its out of your suggested price range, but fark it would be fun, id drive it daily .
i know its out of your suggested price range, but fark it would be fun, id drive it daily .
mq shorty, black, rust free!!, quarter chop, F&R tube bars and sliders, q78's or 33'' stt's, 4.88's with lsd waiting to be thrown in.. :D http://www.patrol4x4.com/forum/showthread.php?t=9540
an air cooled, 2.5 litre petrol motor rated to pull 5tonne? Now that I would like to see.g60boy wrote:http://cgi.ebay.com.au/STEYR-PUCH-PINZG ... dZViewItem
i know its out of your suggested price range, but fark it would be fun, id drive it daily .
Just to clear up the Land Rover towing capacity
This is straight out of the owner's manual
Maximum permissible towed weights V8i & Tdi On-road Off-road
Unbraked trailers 750 kg .......................................................... 500 kg
Trailers with overrun brakes 3500 kg ........................................ 1000 kg
4 wheel trailers with coupled brakes * 4000 kg ......................... 1000 kg
NOTE: * Vehicles fitted with ABS have a towed weight limit of 3500 kg.
So any ABS model is limited to 3500kg. Otherwise 4000kg with coupled brakes and two axles.
Which means Td5 models (except some Defenders) are all 3500kg.
Note that the Disco1 (and Rangie Classic?) have a pissweak ball rating of about 125kg. I think the Disco2 has 250kg. Don't know about Defenders ball ratings.
This is straight out of the owner's manual
Maximum permissible towed weights V8i & Tdi On-road Off-road
Unbraked trailers 750 kg .......................................................... 500 kg
Trailers with overrun brakes 3500 kg ........................................ 1000 kg
4 wheel trailers with coupled brakes * 4000 kg ......................... 1000 kg
NOTE: * Vehicles fitted with ABS have a towed weight limit of 3500 kg.
So any ABS model is limited to 3500kg. Otherwise 4000kg with coupled brakes and two axles.
Which means Td5 models (except some Defenders) are all 3500kg.
Note that the Disco1 (and Rangie Classic?) have a pissweak ball rating of about 125kg. I think the Disco2 has 250kg. Don't know about Defenders ball ratings.
Land Rover Discovery series 1 V8
I am selling the GQ, so it will be the daily driver. My Wife has knocked back the idea of a big suburban dual cab, although she used to drive the yellow F Truck to work.....
It needs to be a 4 door as a minimum. I will be building a trailer to suit the F Truck, and my Mustang. It will have drive over ramps for the Truck, but the mustang will fit between the arches.
I wouldn't mind finding someone with some scales, so I can weigh it. It isn't going, so I cant take it to a weigh bridge.
A GU Manual is ok for 3200kg, or a 100 series is ok for 3500kg, so they are looking good at the moment. Plus my wife works at Toyota, so parts and service are cheap.
It needs to be a 4 door as a minimum. I will be building a trailer to suit the F Truck, and my Mustang. It will have drive over ramps for the Truck, but the mustang will fit between the arches.
I wouldn't mind finding someone with some scales, so I can weigh it. It isn't going, so I cant take it to a weigh bridge.
A GU Manual is ok for 3200kg, or a 100 series is ok for 3500kg, so they are looking good at the moment. Plus my wife works at Toyota, so parts and service are cheap.
www.CVEPerformance.com
Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
I have a 100series and have towed from Brisbane to Sydney a few time now,the trailer with the vehicle on it goes just under 3.5t, some times you dont even realise you are towing.
Coming back from woodpecker last year we had a guy with a Gu (turbo diesel)towing with us as well, from what we worked out the cost of tow were fairly similar, but the 100 went a lot better on hills
Coming back from woodpecker last year we had a guy with a Gu (turbo diesel)towing with us as well, from what we worked out the cost of tow were fairly similar, but the 100 went a lot better on hills
Supported By
Milanco
Phones N Alarms
Buds Customs
Milanco
Phones N Alarms
Buds Customs
the 2.8 is definitely not recommended for towing.. - very underpowered.CRUSHU wrote:Thats good feedback, was the GU 2.8, 3.0 or 4.2?
The GU 2.8's are a lot cheaper, and are probably what I'm aiming for.
Is your 100 diesel? Turbo?
Unless modifications are done to improve the torque and turbo response time.
I'd be goin the 4.2 turbo diesel anytime over the other two.
custom bar work, 4x4 parts, trailers, anything out of steel/alloy :D
I was going to Chip it, and put an exhaust on it, and maybe a bigger cooler or turbo if it helps.Daisy wrote:the 2.8 is definitely not recommended for towing.. - very underpowered.CRUSHU wrote:Thats good feedback, was the GU 2.8, 3.0 or 4.2?
The GU 2.8's are a lot cheaper, and are probably what I'm aiming for.
Is your 100 diesel? Turbo?
Unless modifications are done to improve the torque and turbo response time.
I'd be goin the 4.2 turbo diesel anytime over the other two.
The 4.2 turbo is way over priced, unless I wanted a DX, but the ST 4.2 Turbo's are just as exxy as a Turbo 100 Series, and I would rather that.
The 2.8 has similar power to the aspirated 4.2, and for the 5 times per year that I'm towing, I think it should be adequate.
www.CVEPerformance.com
Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Sounds like you've made up your mind thenCRUSHU wrote:I was going to Chip it, and put an exhaust on it, and maybe a bigger cooler or turbo if it helps.Daisy wrote:the 2.8 is definitely not recommended for towing.. - very underpowered.CRUSHU wrote:Thats good feedback, was the GU 2.8, 3.0 or 4.2?
The GU 2.8's are a lot cheaper, and are probably what I'm aiming for.
Is your 100 diesel? Turbo?
Unless modifications are done to improve the torque and turbo response time.
I'd be goin the 4.2 turbo diesel anytime over the other two.
The 4.2 turbo is way over priced, unless I wanted a DX, but the ST 4.2 Turbo's are just as exxy as a Turbo 100 Series, and I would rather that.
The 2.8 has similar power to the aspirated 4.2, and for the 5 times per year that I'm towing, I think it should be adequate.
Although the 2.8 has enough trouble towing a GU around
Wanted: Car trailer or beaver tail truck, let me know what you got
What? a 1HD-FTE getting 9.6l, sorry mate but I call BS, best my old boy gets is 12's. although chipped 79 and was 12.5's before, oh and 285 Xterrains, general driving, 85km/h to work and backBad_Zook wrote:the 100 is out of the 15k budget thing.. but the best tow vehicle in Turbo Diesel form by far in my opinion.. my old man has just bought one and getting it cut/shut into a extra cab ute currently- the nieghbours have one and it averages 9.6l/ 100k's !!!!
Wanted: Car trailer or beaver tail truck, let me know what you got
Re: Tow Vehicle for around 3000kg +
CRUSHU wrote:What can tow 3000kg or more?
80 series upto late 96 2700kg, onwards 3500kg?
GU 3500kg
GQ 2500kg
Current Rodeo 3000kg
Crewman Ute 2500kg
Bronco's 2500kg?
F100/F150 similar?
Looking for something around $15k or less. 4x4 not essential. To tow my F150 (2200kg - 2500kg plus trailer (500kg - 750kg) or my Mustang. Must be able to cruise at 100kph, and be able to be used as a daily driver. Prefer 4 seater.
according to my gregories manuel and the RTA GQ station wagon is rated at 2800kg,
Who is online
Users browsing this forum: No registered users and 1 guest