i bought a second hand turbo pretty cheap and theres a bit of play in the shaft only a little bit though but the fan hits the side
anyone know if its completely stuffed or can itr be fixed and alos how much dollars i am up for too thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
CT12B Turbo question
Moderators: toaddog, Elmo, DUDELUX
CT12B Turbo question
Email - flossamarosus@hotmail.com
Mate that is alot of play in a turbo, from memory factory tollerance is only measured in 1000'ths of an inch (ie the shaft play should be almost imperciptable without a dial gauge)
I would say you are up for a few $$ in a rebuild. I recently put all new bearings and seals in a Ct20 an it was not hard .. just a bit fiddly really. I was\am Ok with wearing the risk that reassembly was not absloutely 100% perfect as I am planing on installing a 3RZ in a few months once I have made the wife happy by doing some work about the house.
I got the bearings from Ebay from a vendor named Anythingturbo (US based) price killed anything I could find in aus by $100's, even the postage costs were cheaper
What are you planning on installing it on ?
I would say you are up for a few $$ in a rebuild. I recently put all new bearings and seals in a Ct20 an it was not hard .. just a bit fiddly really. I was\am Ok with wearing the risk that reassembly was not absloutely 100% perfect as I am planing on installing a 3RZ in a few months once I have made the wife happy by doing some work about the house.
I got the bearings from Ebay from a vendor named Anythingturbo (US based) price killed anything I could find in aus by $100's, even the postage costs were cheaper
What are you planning on installing it on ?
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Who is online
Users browsing this forum: No registered users and 0 guests