Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4ze1 turbo

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Forum rules
Post Reply
Posts: 210
Joined: Mon Jun 27, 2005 9:13 pm

4ze1 turbo

Post by Sterlo »

Hi Guys

Anyone out there put/putting turbo on 4ze1?? Wondering weather or not to do a full engine rebuild, but only want to run around 8psi. any feed back would be greatly appreciated


Sterlo
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

hi, get yourself a 4xc1 top head, loom and computer. It is a turbo piaza motor and will fit the rodeo bottom end.

NICK
TECH SCREW GURU
Top
Posts: 210
Joined: Mon Jun 27, 2005 9:13 pm

turbo

Post by Sterlo »

G'day nick

Looked at that but putting that head on the 4Ze1 accoring to my calculations will give to high of compression. Using the piaza computer/turbo etc will be to restictive on the 4ze1. I am just doing a full rebuild with all custom work. Its already bored 40thou. over.

Will use stock rods as these are cast steel, set of oversize low comp pistons, no special rings not worth it its not a drag car. Bigger injectors after market ECU wolf or microtech. Brand new garret turbo and custom manifold and i'll be happy. Not going intercooled yet will see how it goes.

Thanks Sterlo
Top
Post Reply

Return to “Dmax / Isuzu / Holden / Great Wall”

Who is online

Users browsing this forum: No registered users and 0 guests