Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LED Strip tail lights

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

LED Strip tail lights

Post by dano80 »

Anyone knows who makes the LED strip tail lights, these also come in the same size for the indicators. I think they must be about 150-200mm wide and maybe only about 15-20 mm high. Looked at all the web sites I know and then some, but still know luck so im throwing open........any ideas??? Needed shortly for rear bar rebuild.

Cheers, Dano.
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

ebay has heaps of them thats where i got mine from.
Top
Posts: 34
Joined: Fri Jun 04, 2004 5:37 pm
Location: rockhampton

Post by rot8s »

hella make them or google search for led technologies they also do them online
Top
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Post by dano80 »

Cheers Fellas, had a good look at 'web' last night think I may have it sorted!

Cheers, Dano.
Top
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

Post by short stuff »

try these guys
http://ledautolamps.com/default-old.htm
they deal through most places such as truck shops and auto shops
Top
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Post by dano80 »

Great, They are the ones I'm after, Will head off to Burson's tomorrow as they are a supplier of the product and local to me.

Cheers again, Dano.
Top
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Post by dano80 »

You know whats funny, some trucks only use these lights (I mean on their own, In conjunction with no other ones!) And as far as I can tell the buggers arn't DOT approved.........Oh well, get them anyway, haven't heard any stories of anyone getting pulled over for some LED's......yet!
They just look so much better than all the other crap on the market at the moment! :roll:
Top
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Post by dano80 »

OK. I spoke to my bro-in-law (ex cop) and he doesn't seem to see why it would be an issue, he reckons they would only pick them if you were caught for using a mobile or some other stupid traffic offence! So I ordered some from Bursons today, should have left Vic. today and be here thurs lunchtime..........will keep you posted. Very well priced too, I payed $100 for the 2 indicators and 2 brake/talilights! :armsup: Time to go to Jaycar to see about some load resistors.
Top
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

Load resistors, to stop the indicators flashing quickly? I put in a non load sensitive flasher unit. Was easy as to just replace the standard one.
Top
Posts: 4323
Joined: Wed Dec 11, 2002 8:42 am
Location: Gold Coast, Queensland

Contact:
Contact HeathGQ

Post by HeathGQ »

AutoBarn are selling ADR approved strip LED's
Heath & Melissa - 93 GQ LWB.
Top
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Post by dano80 »

OK, got to Bursons handed over the coin and walked away with 2 pairs of ADR approved led strips, Didn't realise that they were approved.........but they are! As soon as I get some steel 50X70X5mm will build the rear bar work. Hehehe, its going to look so hornbag!!!!

Dano.
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 6 guests