Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Where in bris to get 3f carb rebuilt

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 304
Joined: Wed Oct 30, 2002 11:14 pm
Location: Brisbane

Where in bris to get 3f carb rebuilt

Post by mlowe76 »

Hi guys,

I own a 3F powered cruiser, mostly runs LPG, but still use petrol.

Just wondering if anyone can recommend a good shop in brisbane to have my carby rebuilt or perhaps just tuned at?

As I'm not sure wether it needs a rebuild or just a tune.

Also I was hoping that the shop would be reasonably priced too.

Thanks
Posts: 11
Joined: Fri May 26, 2006 5:15 am

Post by philpot »

There's a dude down at Eight Mile Plains called Brian Dillon. He runs the Dillon Car Clinic. He's pretty good. However he'll slug you extra if the vhicle is modified. He's pretty awesome with diagnostics though.
Posts: 68
Joined: Wed Jun 01, 2005 12:36 pm
Location: Albany Creek

Post by keencdk »

Carb-Tech at Clontarf (Redcliffe)
Posts: 26
Joined: Thu Aug 09, 2007 2:11 am
Location: Lockyer Valley

Post by Bundy79 »

philpot wrote:There's a dude down at Eight Mile Plains called Brian Dillon. He runs the Dillon Car Clinic. He's pretty good. However he'll slug you extra if the vhicle is modified. He's pretty awesome with diagnostics though.
Dont take any 4wd you value near this dude, i just got totally ripped by him i took my carby to him, he diagnosed it allright charged me a mint, but fix it he didnt, had to be towed back twice. I got fed up took it elsewhere and they found all the vacuum lines were fitted wrong, fuel mix screw was 18 turns out of adjustment... yes thats right 18, the screw was nearly falling out! .
Posts: 304
Joined: Wed Oct 30, 2002 11:14 pm
Location: Brisbane

Post by mlowe76 »

Hi Bundy79
Where did you end up going?

I just booked in to go there next week..

I'd rather not waste my time if there's somewhere better.

Thanks
matt
Posts: 26
Joined: Thu Aug 09, 2007 2:11 am
Location: Lockyer Valley

Post by Bundy79 »

mlowe76 wrote:Hi Bundy79
Where did you end up going?

I just booked in to go there next week..

I'd rather not waste my time if there's somewhere better.

Thanks
matt
I would go to Pitstop 4x4 in wynnum, mike there is fantastic, fixed it right up, no bullshit.
Posts: 304
Joined: Wed Oct 30, 2002 11:14 pm
Location: Brisbane

Post by mlowe76 »

I don't think I'll need to be taking it anywhere to get fixed.


I had the sudden urge to check the plugs, as I paid a shop on the northside of brissy to replace them when I recently had it tuned.

It came back running even worse than before

upon inspecting the plugs its looks like they have stuck some old plugs in, they aren't the normal part number I usually use - same brand but not the same part number.

And the center electrode had a V shaped grove burnt into it - I guess this indicates they are old?

Either way, a new set of plugs and it idles and runs, even starts on petrol doesn't miss a beat.

I guess I'll just drive it and see if its stays running fine.

Save myself being shafted by Dillions car clinic hopefully :)

Thanks everyone for their help.

Matt
Post Reply

Who is online

Users browsing this forum: No registered users and 84 guests