Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ blanking plates ( interior switches )

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Contact:
Contact dwaynes

GQ blanking plates ( interior switches )

Post by dwaynes »

Does any one know the size of these as i want to order some switches and am hoping they fit right in.
www.mudrhino.com.au
Top
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

Why dont you measure one?
Top
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Contact:
Contact dwaynes

Post by dwaynes »

jet-6 wrote:Why dont you measure one?
because i dont have the car where i am. was hoping if the fit to order today not tomorrow. But if know one knows i will measure tonight.
www.mudrhino.com.au
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

The Narva Rocker switches fit, you just need to file a bit out of the dash to make the opening rectangular.
:rofl: :popcorn: :snipersmile:
Top
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

If there the same size as GU, yer as above, file the one corner out and Narvas fit perfect
Top
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

I didn't file mine. Just pushed firmly. But the standard Narva ones will do fine.
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Top
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Contact:
Contact dwaynes

Post by dwaynes »

thats okay as i measured them up
21mmx36mm roughly but thanks for the tip with the narva idea
www.mudrhino.com.au
Top
Posts: 192
Joined: Tue Dec 20, 2005 1:37 pm
Location: Brisbane

Post by spannercrab »

Carling Contura Rocker Switches are also a snap fit - no fiddling required

They are the same ones they use in the ARB Air Locker kits - I use them for everything, because they look so tidy, no drilling etc required.

I use the LED backlit type imported from Mouser electronics in the 'states
If it's worth doing - it's worth doing to excess ...
Top
Posts: 69
Joined: Sat Oct 09, 2004 10:24 am
Location: S.A.

Post by MAVRK-4 »

Yeah any 34.5mm x 20mm Narva Switches fit perfect, the likes of:
#63010BL up to #63027BL

On page 3 of the Narva Switches listing here:
http://www.narva.com.au/Switches_11.html

I find it better not to file the corner out of the dash, switches are a lot firmer and stay in.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 86 guests