Hey.
Well ill be looking for a LT230 transfer soon. From what i hear they are really strong, and used in alot of buggys, are they as strong as im told?
What i want to know is which is the best, its for a hilux crawler. It has to have a brake on the rear of the case.
I stole the below info from the bible.
So the one im after would be one a LT230R? I would be after reduction gears later and you cant do that to the chain driven one, correct?
Any info would be great.
Cheers
1983 to approx. 1984 models are fitted with Land Rover's LT230R unit, which is gear-driven and incorporates a manually selectable diff-lock.
1984 (approx.) to Oct 1988 models are fitted with Land Rover's LT230T unit, similar to the LT230R but with taper bearings on the intermediate shaft instead of the previously used needle roller bearings.
Oct 1988 onwards models are fitted with a Borg Warner chain-driven transfer box, incorporating a viscous differential lock.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
LT230's
Moderator: Micka
LT230's
----------------------------------------------------
Xcab Lux on 37 Treps
Xcab Lux on 37 Treps
Re: LT230's
Youwant an LT230Tjustinshere wrote:Hey.
Well ill be looking for a LT230 transfer soon. From what i hear they are really strong, and used in alot of buggys, are they as strong as im told?
What i want to know is which is the best, its for a hilux crawler. It has to have a brake on the rear of the case.
I stole the below info from the bible.
So the one im after would be one a LT230R? I would be after reduction gears later and you cant do that to the chain driven one, correct?
Any info would be great.
Cheers
1983 to approx. 1984 models are fitted with Land Rover's LT230R unit, which is gear-driven and incorporates a manually selectable diff-lock.
1984 (approx.) to Oct 1988 models are fitted with Land Rover's LT230T unit, similar to the LT230R but with taper bearings on the intermediate shaft instead of the previously used needle roller bearings.
Oct 1988 onwards models are fitted with a Borg Warner chain-driven transfer box, incorporating a viscous differential lock.
Wanted: Car trailer or beaver tail truck, let me know what you got
Victorians don't need crawler gears 
depends on what final drive ratio you want.justinshere wrote:Still get reduction for the 230T?
lt230 has a low gear ratio of 3.32 FYI.
for eg... my old buggy - 3.1:1 gearbox (turbo700) - 3.32:1 (lt230) - 4.1 (60 series diffs) gave me a final drive ratio of 42:1
Ideally final drive ratio varies for the type of competition driving you do.
custom bar work, 4x4 parts, trailers, anything out of steel/alloy :D
here is sum more info
Transfer Box
The 4-sp gearbox, fitted to all manual Range Rovers from 1970 to 1983, has a transfer box which is integral with the gearbox assembly and is, therefore, inseparable from it. The 5-sp manual gearbox, introduced in July 1983, has a separate transfer box as follows:
1983 to approx. 1984 models are fitted with Land Rover's LT230R unit, which is gear-driven and incorporates a manually selectable diff-lock.
1984 (approx.) to Oct 1988 models are fitted with Land Rover's LT230T unit, similar to the LT230R but with taper bearings on the intermediate shaft instead of the previously used needle roller bearings.
Oct 1988 onwards models are fitted with a Borg Warner chain-driven transfer box, incorporating a viscous differential lock.
Automatic models also have separate transfer boxes, as follows:
3-sp autos are fitted with either the LT230R or LT230T transfer boxes.
4-sp autos to Sept 1988 are fitted with the LT230T transfer box.
4-sp auto vehicles from Oct 1988 onwards are fitted with the Borg Warner chain-driven transfer box.
This section includes fully reconditioned transfer gearboxes, as well as the components associated with the transfer box, such as the speedo cable. Also included is the parking brake, since this operates on the rear of the transfer box rather than the rear wheels, as is conventional. As with the main gearbox, we have only listed a limited selection of internal components, because repair is rarely as cost-effective as replacement with a recon unit.
Unit Identification
Identification of the transfer box fitted to your Range Rover is fairly straightforward:
4-sp. All 4-sp manual vehicles have an integral transfer box.
5-sp/LT230R. LT230R transfer boxes fitted to 5-sp vehicles have a serial number (located on the rear lower face of the transfer box) which begins 15D.
5-sp/LT230T. LT230T transfer boxes fitted to 5-sp vehicles have a serial number beginning 27D or 28D.
5-sp/Borg Warner. Vehicles fitted with the BW transfer box are easily identified from the transfer gear lever inside the car, which has a simple fore & aft plane instead of the H-gate of earlier vehicles.
3-sp Auto/LT230R. LT230 transfer boxes fitted to 3-sp auto vehicles have a serial no. beginning 14D.
3-sp Auto/LT230T. LT230T transfer boxes fitted to 3-sp autos have a serial no. beginning 26D.
4-sp Auto/LT230T. 4-sp auto vehicles with the LT230R transfer box have a serial no. beginning 28D
4-sp Auto/Borg Warner. These vehicles are easily identified by the transfer gear lever inside the car, which has a simple fore & aft plane instead of the H-gate of earlier vehicles.
Gear Ratios
The high-gear ratios of the transfer boxes are as follows:
LT230R
14D (Auto) 1.003:1
15D (Manual) 1.192:1
LT230T
26D (Auto) 1.003:1
27D (Manual)1.192:1
28D (Man & auto)1.222:1
Borg Warner (Man & auto) 1.206:1
Transfer Box
The 4-sp gearbox, fitted to all manual Range Rovers from 1970 to 1983, has a transfer box which is integral with the gearbox assembly and is, therefore, inseparable from it. The 5-sp manual gearbox, introduced in July 1983, has a separate transfer box as follows:
1983 to approx. 1984 models are fitted with Land Rover's LT230R unit, which is gear-driven and incorporates a manually selectable diff-lock.
1984 (approx.) to Oct 1988 models are fitted with Land Rover's LT230T unit, similar to the LT230R but with taper bearings on the intermediate shaft instead of the previously used needle roller bearings.
Oct 1988 onwards models are fitted with a Borg Warner chain-driven transfer box, incorporating a viscous differential lock.
Automatic models also have separate transfer boxes, as follows:
3-sp autos are fitted with either the LT230R or LT230T transfer boxes.
4-sp autos to Sept 1988 are fitted with the LT230T transfer box.
4-sp auto vehicles from Oct 1988 onwards are fitted with the Borg Warner chain-driven transfer box.
This section includes fully reconditioned transfer gearboxes, as well as the components associated with the transfer box, such as the speedo cable. Also included is the parking brake, since this operates on the rear of the transfer box rather than the rear wheels, as is conventional. As with the main gearbox, we have only listed a limited selection of internal components, because repair is rarely as cost-effective as replacement with a recon unit.
Unit Identification
Identification of the transfer box fitted to your Range Rover is fairly straightforward:
4-sp. All 4-sp manual vehicles have an integral transfer box.
5-sp/LT230R. LT230R transfer boxes fitted to 5-sp vehicles have a serial number (located on the rear lower face of the transfer box) which begins 15D.
5-sp/LT230T. LT230T transfer boxes fitted to 5-sp vehicles have a serial number beginning 27D or 28D.
5-sp/Borg Warner. Vehicles fitted with the BW transfer box are easily identified from the transfer gear lever inside the car, which has a simple fore & aft plane instead of the H-gate of earlier vehicles.
3-sp Auto/LT230R. LT230 transfer boxes fitted to 3-sp auto vehicles have a serial no. beginning 14D.
3-sp Auto/LT230T. LT230T transfer boxes fitted to 3-sp autos have a serial no. beginning 26D.
4-sp Auto/LT230T. 4-sp auto vehicles with the LT230R transfer box have a serial no. beginning 28D
4-sp Auto/Borg Warner. These vehicles are easily identified by the transfer gear lever inside the car, which has a simple fore & aft plane instead of the H-gate of earlier vehicles.
Gear Ratios
The high-gear ratios of the transfer boxes are as follows:
LT230R
14D (Auto) 1.003:1
15D (Manual) 1.192:1
LT230T
26D (Auto) 1.003:1
27D (Manual)1.192:1
28D (Man & auto)1.222:1
Borg Warner (Man & auto) 1.206:1
buggy time............
Who is online
Users browsing this forum: No registered users and 16 guests