Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux Gearbox and Clutch Problems

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 64
Joined: Fri Feb 10, 2006 6:55 am
Location: Gympie, QLD

Hilux Gearbox and Clutch Problems

Post by unbreakable »

Took my 2.8L hilux turbo diesel for a spin down the coast on Friday and shattered the clutch plate on the way (one of the springs fell out). Fixed that with a heavy duty RPM clutch kit and then on the way home lost 5th gear and eventually the whole gearbox failed.

Is having 33's on a hilux along with the extra tourqe from the turbo too much for the driveline or am I just unlucky? I have bought a fully reconditioned 5 speed gearbox for $2000 fitted which also comes with a warranty. How long should I expect for this one to last?
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: Hilux Gearbox and Clutch Problems

Post by Guy »

unbreakable wrote:Took my 2.8L hilux turbo diesel for a spin down the coast on Friday and shattered the clutch plate on the way (one of the springs fell out). Fixed that with a heavy duty RPM clutch kit and then on the way home lost 5th gear and eventually the whole gearbox failed.

Is having 33's on a hilux along with the extra tourqe from the turbo too much for the driveline or am I just unlucky? I have bought a fully reconditioned 5 speed gearbox for $2000 fitted which also comes with a warranty. How long should I expect for this one to last?
depends on how much mechanical sympathy you have .. could destroy it easily in less than 6 months if you tried .. but should last for years.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 728
Joined: Sun Aug 24, 2003 8:46 pm
Location: Canberra (too far from the sea)

Post by twinnie »

the buying used bit on hiluxes said 5th gear is best saved for easy flat stuff, drop down on hills or it will fail.

so i'd say just use 4th more. not that i'm an authority on these things

Matt
Posts: 207
Joined: Mon May 02, 2005 9:37 am
Location: melbourne

Post by YB.LOW4 »

i have 35's on my lux all day everyday with a 2.4 turbo, intercooled etc and when i blew the g52 box which was reco'ed before i bought it i about 8 months but looking back at it, it did cop abit of a hiding and as twinnie said dropping back a gear on the hills might have helped the life span of it. i have a r150 in mine now and cant be happier. (except maybe a gear drive transfer would be better then chain)
Gu Ute,
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

YB.LOW4 wrote:(except maybe a gear drive transfer would be better then chain)
Why do you say this?

Would it be worth swapping a gear transfer onto the back of the R series box?

The chain transfer is lower in low range which is better in my opinion.

(sorry for taking this off the original topic a bit).
Wheeling on completely wicked angles, without even looking stable.
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Highway-Star wrote:
YB.LOW4 wrote:(except maybe a gear drive transfer would be better then chain)
Why do you say this?

Would it be worth swapping a gear transfer onto the back of the R series box?

The chain transfer is lower in low range which is better in my opinion.

(sorry for taking this off the original topic a bit).
I dont know alot about hiluxes but I'd assume its because there are plenty of aftermarket reduction gearsets (crawler gears) on the market for the gear driven transfers. If you've got a chain drive all you can do is change diff ratios. Not sure if the transfers are a straight swap.
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

RAY185 wrote:I dont know alot about hiluxes but I'd assume its because there are plenty of aftermarket reduction gearsets (crawler gears) on the market for the gear driven transfers. If you've got a chain drive all you can do is change diff ratios. Not sure if the transfers are a straight swap.
Thought of that, but the way it was posted sounded like another reason...

The chain driven is lower standard, which is nice.

I've got a G52 withs gear transfer, and R151 with chain transfer sitting here, and no way they are a straight swap, but I understand it can be done.
Wheeling on completely wicked angles, without even looking stable.
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Yeah can be done there is plenty of info on marlin site it must be down at the moment will ink it up when i can
plenty of parts on the bench
Posts: 207
Joined: Mon May 02, 2005 9:37 am
Location: melbourne

Post by YB.LOW4 »

RAY185 wrote:
Highway-Star wrote:
YB.LOW4 wrote:(except maybe a gear drive transfer would be better then chain)
Why do you say this?

Would it be worth swapping a gear transfer onto the back of the R series box?

The chain transfer is lower in low range which is better in my opinion.

(sorry for taking this off the original topic a bit).
I dont know alot about hiluxes but I'd assume its because there are plenty of aftermarket reduction gearsets (crawler gears) on the market for the gear driven transfers. If you've got a chain drive all you can do is change diff ratios. Not sure if the transfers are a straight swap.
thats exactly why mate.
Gu Ute,
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Here's the link could just use the box to case adapter using a top shift case :lol:
http://www.marlincrawler.com/htm/transf ... co_box.htm
plenty of parts on the bench
Post Reply

Who is online

Users browsing this forum: No registered users and 45 guests