Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hard to find parts (FJ73 Middy)

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 347
Joined: Mon Dec 01, 2003 9:13 pm
Location: Wherever I May Roam (or Melbourne)

Hard to find parts (FJ73 Middy)

Post by V8 Middy »

I'm looking to do a soft top conversion (or easily removable hard top) for the Middy. I've heard that some imports (possible bundeeras) had rear doors with removable glass but they are extremely rare. Would anyone know a starting point to source a set?

The only other option I can think of is to chop down the doors and put in a lift up rear window but that sounds like potentially too much mucking around.

Any suggestions appreciated

Thanks
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
Top
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Re: Hard to find parts (FJ73 Middy)

Post by midi73 »

V8 Middy wrote:I'm looking to do a soft top conversion (or easily removable hard top) for the Middy. I've heard that some imports (possible bundeeras) had rear doors with removable glass but they are extremely rare. Would anyone know a starting point to source a set?

The only other option I can think of is to chop down the doors and put in a lift up rear window but that sounds like potentially too much mucking around.

Any suggestions appreciated

Thanks
Why dont you carefully cut the top off your rear doors and modify them so they can be lift on or off.
Top
Posts: 347
Joined: Mon Dec 01, 2003 9:13 pm
Location: Wherever I May Roam (or Melbourne)

Post by V8 Middy »

Do you know someone who could quote on modifying my existing doors? (in Melbourne) Previously when I've approached panel beaters about this type of thing they don't want to know about it.

Thanks
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
Top
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Post by midi73 »

V8 Middy wrote:Do you know someone who could quote on modifying my existing doors? (in Melbourne) Previously when I've approached panel beaters about this type of thing they don't want to know about it.

Thanks
I could help but I am in QLD. I reckon maybe go to a sheet metal worker/ steel fabricator. He could help cut it off and make up a bottom plate under the window and on top of the door. He would also help make up the pole system to go into the door. Then go to a panel beater to finish it off and paint it. Might not scare him so much then. I have seen a few guys on this forum from down that way that would have no trouble doing that sort of thing for you. Maybe one of them will offer to help.
Cheers.
Dave.
Top
Posts: 309
Joined: Sun Apr 24, 2005 8:20 pm

Post by Thommo 73 »

mmm soft top.
i was going to do what your thinking of to my middy, but im not going to run the roof as often so i got hold of a set of doors then cut the tops off. havnt finshed yet.
bit of work in doing it
better you get some doors and practise.
1uzed and no home for it
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 83 guests