Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Body lift progress - 1 question ?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 90
Joined: Thu Oct 02, 2003 8:32 pm
Location: Darwin, NT

Body lift progress - 1 question ?

Post by jasonmcc »

Hi

Been doing a body lift for the last couple of days. Got all the blocks in and bolted down, steering sorted, rear wheels are on.

But on the front the tyre hits the tube coming off the chassis that holds the bumper on. Can i just cut this off, which is the only option i can see.

Thanks

Jason

Please reply i am waiting on what to do.
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

cut mine off when i put the 31's on
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 90
Joined: Thu Oct 02, 2003 8:32 pm
Location: Darwin, NT

What about my bumper

Post by jasonmcc »

My bumper will fall off then, as the only bull bar i have is a shitty alloy one that has been made to fit.
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

i cut mine here
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 90
Joined: Thu Oct 02, 2003 8:32 pm
Location: Darwin, NT

Yep thats the spot

Post by jasonmcc »

But what I am going to do for the front end, what can i do about my indicators, Where can i mount them if i have no bumper
Win if you can, Loose if you must, but never give up !!!!
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

ur bullbar should still be mounted to these holes shouldnt it?
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 90
Joined: Thu Oct 02, 2003 8:32 pm
Location: Darwin, NT

Bullbar

Post by jasonmcc »

Here is the bar
Win if you can, Loose if you must, but never give up !!!!
Top
Posts: 90
Joined: Thu Oct 02, 2003 8:32 pm
Location: Darwin, NT

Here is how it mounts

Post by jasonmcc »

It will look shit with just the bull bar there and no bumper, also no where to mount indicators.
Win if you can, Loose if you must, but never give up !!!!
Top
Posts: 90
Joined: Thu Oct 02, 2003 8:32 pm
Location: Darwin, NT

Here is how it mounts

Post by jasonmcc »

It will look shit with just the bull bar there and no bumper, also no where to mount indicators.
Win if you can, Loose if you must, but never give up !!!!
Top
Posts: 314
Joined: Mon Mar 03, 2003 9:16 pm
Location: Newcastle

Contact:
Contact purefmx

Post by purefmx »

I run one of these bars at the moment, i removed the bumper and i dont think it looks that bad at all. You should find a small hole where you can mount your indicators. If you do cut the side bars off, remember to leave just enough for the bullbar to mount to with the "U" shackles.
1985 LWB Suzuki Sierra, Lock-Rite Rear, SPOA, 2" Body Lift, Climax shackles, Rancho's,
Series 1 Rockhoppers, 31x11.5 MT'S, "To return from the dead very sooooon!"
[url]http://www.cyberdesigns.tk[/url]
[url]http://www.purefmx.tk[/url]
Top
Posts: 90
Joined: Thu Oct 02, 2003 8:32 pm
Location: Darwin, NT

Post by jasonmcc »

what do you mean by u run one of "these bars". Are you refering to my one. If so what is the small hole for the indicators you are talking about.

Thanks Jason
Win if you can, Loose if you must, but never give up !!!!
Top
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

can you post some pics of your zook with the bar only . I was thinking of removing my bumper too just wasnt sure how to remount it without the bumper on
P.E.T.A
People eating tasty animals.
Top
Posts: 216
Joined: Tue Aug 12, 2003 9:16 am
Location: Melbourne

Contact:
Contact WaveCult

Re: Here is how it mounts

Post by WaveCult »

jasonmcc wrote:It will look shit with just the bull bar there and no bumper, also no where to mount indicators.


Come on, lateral thinking... ;) could do inside grill between headlights, outside the grill (attaching should be no problem), could put them on the bonnet (need to drill), could find some way to attach them vertically (as in, upright... parking light below, blinker above) on the thicker sections (center part) of bar barwork... problem is attaching them... but then again, all you need is a drill, a coulpe of screws and off you go I guess... wiring can be discretely (almost "invisibly") attached to barwork too.

Just a thought... I mean I've got a GV and I promissed I wouldn't do any drilling or grinding until it's paid off!! :D

Good luck mate! And post lotsa pics! ;)

Cheers,



Luis
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

I got one of the crappy factory "bull bars" as well .. looooooong ago I cut of the "outrigger" factory tin can bumper supports .. actually I belive they are more like indicator supports as the factory bumper aint that strong .. Anyways I simply used a 4 little L shaped brackets and bolted the bumper to the "bullbar" as a temporary measure 5 years ago :D

Its still there and still works .. Indicators stay attatched to vehicle :)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest