Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

AC pump done a bearing

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
GM
Posts: 58
Joined: Mon Sep 27, 2004 7:47 pm
Location: Warragul

AC pump done a bearing

Post by GM »

The air con. pump has a noisey bearing in front pully. How do I get the front pully off pump???????
80 series To travel and GQ to play
Top
Posts: 192
Joined: Tue Dec 20, 2005 1:37 pm
Location: Brisbane

Post by spannercrab »

What model? Particularly - which compressor model? Sanden, Denso or Other?

Most of them have a single lock nut on the hub, which then pulls off either a splined or key-taper shaft, then there is usually an inside circlip or similar retaining the bearing and pulley.

The bearings aren't cheap, I put a new one in my Sanden SD508 which is used for an air compressor - 45 bucks :shock:
If it's worth doing - it's worth doing to excess ...
Top
GM
Posts: 58
Joined: Mon Sep 27, 2004 7:47 pm
Location: Warragul

Post by GM »

Thanks for your help. We got it off and have the bearing on order. Did not price it but it will be cheaper than $195 for a 2nd hand pump from the wreakers
80 series To travel and GQ to play
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 141 guests