Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wheel Spacers

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

I think this discussion has gone far enough. :)

The bottom line is spacers are illegal under ADR's and shouldn't be used "on road". No, it's not to stop you having fun- it's because they are dangerous and can cause mechanical failures * no matter what the design* ;)

Here's a rundown from Toyo tyres on each state's laws. http://www.toyo.com.au/TechInfoPDFs/Alt ... ations.pdf
* The fitment of wheel spacers between the wheel mounting face and the hub is not permitted unless O.E.
It's also listed here :

http://www.dotars.gov.au/roads/safety/b ... _ncop.aspx under the Steering / Suspension section

http://www.dotars.gov.au/roads/safety/b ... eb2006.pdf
David
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

OK, will watch from the sidelines..... :sleeping:

at least till it gets raised in another thread next week. :roll:
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 81
Joined: Sun Sep 30, 2007 7:59 am
Location: oregon

Post by stariondriver »

MightyMouse wrote:
stariondriver wrote:
"hub centric"spacers are out there here are some we are doing for the starion club just as an example
http://www.starquestclub.com/forums/vie ... hp?t=66481

I don't know anything about "hub centric" spacers.
Do they solve the bearing loading issue ?
Are they better than rim offset ?
Are they legal ?

Info appreciated.
Guys, i am not saying that everyone should run spacers or that they are "Hella Sick Bra" or whatever. so here are the answers to above questions.....
no. but a offset wheels loads bearings too. so does driving offroad and having a passenger in your rocky or upgrading to bigger tires.

no. but yes because you can swap them out and back in for the reason of using a bigger tire during a hunting or off road playing trip and later swap back to the skinnies for the rest of the road driving season

(my neighbor has a suzuki samuri he uses during Elk Hunting and he will put on 30/9.50/15's and spacers on for the hunting trip. the spacers let him turn the 30 inch tire without rubbing the springs. then later he put his old 235/75/15 stockers on and drives it daily. the spacers let him swap back and forth. if he just went with a different wheel he would have to run it all the time and the bearings would be loaded all the time)

no. they are not legal. they just are better as far as centering on the hub over a regular spacer
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

MightyMouse wrote:OK, will watch from the sidelines..... :sleeping:

at least till it gets raised in another thread next week. :roll:
:lol: Yep, it's bound to happen.

Starion driver- I take it you're from Oregon USA? They may well be legal where you live, it never ceases to amaze me what "mods" they seem to allow (or ignore?) on your roads.
David
Posts: 81
Joined: Sun Sep 30, 2007 7:59 am
Location: oregon

Post by stariondriver »

murcod wrote:
MightyMouse wrote:OK, will watch from the sidelines..... :sleeping:

at least till it gets raised in another thread next week. :roll:
:lol: Yep, it's bound to happen.

Starion driver- I take it you're from Oregon USA? They may well be legal where you live, it never ceases to amaze me what "mods" they seem to allow (or ignore?) on your roads.

uh no they are not legal. neither are illegal mexicans that live here but oregon doesnt seem to care.
the only mods i see around here are loud ass fart tip mufflers on hondas wich is way worse than any wheel spacer.

i really dont know what your talking about though as far as oregon.

here are the wheel details from that one i posted on the front of my rocky
it has -46 offset. is that the same as stock rocky?

Image

are here are some examples of what i meant by the spacer function as part of the wheel assembly. spacer being part of the wheel etc etc

Image

Image

Image
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests