Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
89 Patrol engine Mounts
89 Patrol engine Mounts
HELP i keep breaking LH Engine mounts - any mods or tips to change it or fix it. Any thoughts appreciated! a mate once drilled out the chassis bracket & put a body mount in it but i would think it would vibrate
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...
Are you replacing them with new genuine mounts? Check all your other mounts - gearbox crossmember - they may be torn, allowing more than normal rotational forces to tear the mount, when the motor torques up on the passenger side. Some aftermarket mounts are harder and brittle compared to the genuine, genuine are nice and squishy, giving a quieter ride also. Genuines aren't cheap, but you get what you pay for...
Built, not bought.
Genuine one around $150 i found out. In the end I drilled a hole right thru the guts of it, ground off the weld on the top plate and bashed the pin out and put the bolt right thru it ( 8.8 grade of course) Seems to work great and no increase in vibration over the std one - HMMMM now I will out and find those hills again!!!!
Who is online
Users browsing this forum: No registered users and 0 guests