Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rock Lights??
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Rock Lights??
What are people using for rock lights. im looking at putting some in but not sure what the best option is?? as in what gives off a good amount of light but also affordable..umm not sure what is better globes or LED???
if anyone could shed some light it would be appreciated!!
Evan
if anyone could shed some light it would be appreciated!!
Evan
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
i used sealed down lights,,you get a pack of 4 from bunnings ect for under $10,,cut holes where you want them & sickaflex them in,,there 12volt,
& when mounted in this fashion they sit flush with inner guard ect,,
I usually get a couple of seasons from them,ie old ones did two years of comp circute, doing every thing from OBC to ALLTERAIN CHALLENGE &
would probably still be going if I didnt rite the truck off,there still under the guards in the wreck at all 4x4 parts mindon
& when mounted in this fashion they sit flush with inner guard ect,,
I usually get a couple of seasons from them,ie old ones did two years of comp circute, doing every thing from OBC to ALLTERAIN CHALLENGE &
would probably still be going if I didnt rite the truck off,there still under the guards in the wreck at all 4x4 parts mindon
same idea here.. after litterally FALLING out of the zuki one dark night, i went for the bunnings light idea..(pond light actually) certainly does the job. I mounted mine in the chassis cross rails, out of the way of road debris, and in a 50mm-40mm? rubber PVC pipe adaptor.
night pic will have to wait till its dark


EDIT!:
Its night time so here ya go....


obviously a white light is going to be alot brighter/crisper, but iv also got a set of hella fog lights on the front bar...facing either side... maybe vulnerable but for free and I have to at least TRY to break em...
can you have to much light!??


night pic will have to wait till its dark



EDIT!:
Its night time so here ya go....


obviously a white light is going to be alot brighter/crisper, but iv also got a set of hella fog lights on the front bar...facing either side... maybe vulnerable but for free and I have to at least TRY to break em...
can you have to much light!??


Last edited by foolsp33d on Thu Oct 18, 2007 8:41 pm, edited 1 time in total.
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]
A few episodes before they can it? :lol:[/quote]
A few episodes before they can it? :lol:[/quote]
Im here for the sausage!
White ones would serve a purpose but i think easily broken!!DIRTY ROCK STAR wrote:Evan we all know you want to use lots of neons.
ill have a look at bunnings next time im there!!
is anyone using anythin different to 12V down lights???
EVAN
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
These from Super cheap.
More sturdier with thicker glass than down lights. Except they be about $20.00 more... Are $25.00 a pair. Use a 55w H3 bulb. 3 to 4 amps each.
Good for mirror lights, reverse lights, as well as rock lights. I like them so much that Ive wasted heaps of money on them. Got 4 on the rear of me Brumby, two on the mirrors. Got two for reverse lights on me ute, two under the tray, two on mirrors, one up under front. Come with a bracket and are adjustable. Glass is fluted to give a nice wide beam. Has a drain hole facing backwards to remove any ingress of water. Rubber flange grommet thing on the rear that covers the rear of the bulb. Have yet to smash one (Does that mean I dont go hard enough?
) --- although the glass fell out of one from vibrations Im guessing. Useless made-in-china crap. Ok, don't buys these. Go grab some down lights. And yep, Im guessing that a standard 50w downlights would run hotter than a 55w H3 bulb. But Im only speculating - havent measured the temps yet --- should go do that. Be interesting to see what they both run at.




More sturdier with thicker glass than down lights. Except they be about $20.00 more... Are $25.00 a pair. Use a 55w H3 bulb. 3 to 4 amps each.
Good for mirror lights, reverse lights, as well as rock lights. I like them so much that Ive wasted heaps of money on them. Got 4 on the rear of me Brumby, two on the mirrors. Got two for reverse lights on me ute, two under the tray, two on mirrors, one up under front. Come with a bracket and are adjustable. Glass is fluted to give a nice wide beam. Has a drain hole facing backwards to remove any ingress of water. Rubber flange grommet thing on the rear that covers the rear of the bulb. Have yet to smash one (Does that mean I dont go hard enough?
) --- although the glass fell out of one from vibrations Im guessing. Useless made-in-china crap. Ok, don't buys these. Go grab some down lights. And yep, Im guessing that a standard 50w downlights would run hotter than a 55w H3 bulb. But Im only speculating - havent measured the temps yet --- should go do that. Be interesting to see what they both run at.




Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
I think I'm missing some thing here...
Why do you need to have rock lights?
Why on earth would you need lights on mirrors?
The fog lights on the end of the bullbar are very exposed, can't see them lasting long.
It seams as though there are a lot of people on OL that are scared of the dark...

Why do you need to have rock lights?
Why on earth would you need lights on mirrors?
The fog lights on the end of the bullbar are very exposed, can't see them lasting long.
It seams as though there are a lot of people on OL that are scared of the dark...

My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Where can you get those strip neons they put on ricers really cheap? And would they break easy? I reckon they'd look shithot under a 4by in the bush at night with 35's or bigger.
Would be a good pisstake at the ricer boys' expense too.
Would be a good pisstake at the ricer boys' expense too.

[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Premiers 1999, 2007, 2009
Spoon 2010
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
Nah, that's just Waterhouse.GUJohnno wrote:Maybe some of those valve caps that glow as you go...?
Seriously, i reckon the bling bling neons would look groulse full noise hammering up the likes of shortcut 2 in the dark

[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Premiers 1999, 2007, 2009
Spoon 2010
I had the cheapo little spoties from supercheap but most of them broke so i'm going to put a shitload of them little supercheap fluros under it this time. There probably not as bright as my old lights but I think if I fit enough of them should work.
For $10 each it's not great loss if they fail. I will be sealing them with sealer too.
Cheers Mick.

For $10 each it's not great loss if they fail. I will be sealing them with sealer too.
Cheers Mick.
I had a few of the rubber bodied sealed beam tractor lights under my old Lux that I plan on fitting to my new one also.
They are a little bulky and only suit some mounting spots but they are fairly cheap(though not as cheap as some of the other options), tough, sealed beam so dont fill with water,nice spread pattern and are only 35watt so dont suck heaps of power if you run 6-8 of them
Narva part # 72450

Here is how I had a pair of them mounted under my old ute. Also had a pair lighting behind the rear of the back tyres and a pair lighting behind the fronts and for in front of the front tyres I had a pair of the supa cheap ones shown above as they fitted into the back of the bullbar easier.


Paul.
They are a little bulky and only suit some mounting spots but they are fairly cheap(though not as cheap as some of the other options), tough, sealed beam so dont fill with water,nice spread pattern and are only 35watt so dont suck heaps of power if you run 6-8 of them

Narva part # 72450

Here is how I had a pair of them mounted under my old ute. Also had a pair lighting behind the rear of the back tyres and a pair lighting behind the fronts and for in front of the front tyres I had a pair of the supa cheap ones shown above as they fitted into the back of the bullbar easier.


Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
www.teamcarnage.net
umm No not scared of the dark bud, if doing night driving and doing some difficult terrain having the under body lights allow you navi to see everything so less cahnce of breaking/damaging things!!GUJohnno wrote:I think I'm missing some thing here...![]()
Why do you need to have rock lights?
Why on earth would you need lights on mirrors?
The fog lights on the end of the bullbar are very exposed, can't see them lasting long.
It seams as though there are a lot of people on OL that are scared of the dark...

Thanks everyone for you views!! and experiences!!
Evan
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
evanstaniland wrote:umm No not scared of the dark bud, if doing night driving and doing some difficult terrain having the under body lights allow you navi to see everything so less cahnce of breaking/damaging things!!GUJohnno wrote:I think I'm missing some thing here...![]()
Why do you need to have rock lights?
Why on earth would you need lights on mirrors?
The fog lights on the end of the bullbar are very exposed, can't see them lasting long.
It seams as though there are a lot of people on OL that are scared of the dark...![]()
Thanks everyone for you views!! and experiences!!
Evan
what i dont get is the guys who run rock lights but they dont use navis, so they have these lights on the passenger side of the truck lighing up a patch of ground that they cant actualy see

i can understand a light just infront of the drivers front wheel tho
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Bronwyn Bishop does it for me.[/quote]
well i was up in 'the lake' one night on a known suitable road.. was a bit of a dangling affair, decided to get out and inspect, and fell a meter and a half into a rut.. soooo i know why I run the side light....macca81 wrote:evanstaniland wrote:umm No not scared of the dark bud, if doing night driving and doing some difficult terrain having the under body lights allow you navi to see everything so less cahnce of breaking/damaging things!!GUJohnno wrote:I think I'm missing some thing here...![]()
Why do you need to have rock lights?
Why on earth would you need lights on mirrors?
The fog lights on the end of the bullbar are very exposed, can't see them lasting long.
It seams as though there are a lot of people on OL that are scared of the dark...![]()
Thanks everyone for you views!! and experiences!!
Evan
what i dont get is the guys who run rock lights but they dont use navis, so they have these lights on the passenger side of the truck lighing up a patch of ground that they cant actualy see
i can understand a light just infront of the drivers front wheel tho
and it keeps the boogy man away on those dark scary outings to....
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]
A few episodes before they can it? :lol:[/quote]
A few episodes before they can it? :lol:[/quote]
sounds nearly as good as stick on checkerplateAussieCJ7 wrote:K-mart have stick on white led under car lights for the fully sik bros but at $20 for a set of 4 including wiring and switch has to be worth try

[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Premiers 1999, 2007, 2009
Spoon 2010
Here's my bargin basement solution
I bought some little 2 pin holders from a lighting shop,and cable tied the wires to the body

Plug a light in,and slip a cable tie around the body of the light to hold it in position.....and wal-aa! Cheap as chips rock lights!

If they get broken,it's off to the $2 shop for another pair!

I've only had one get broken so far,and another has it's lens cracked,but still on the truck and working...Will have to be replaced soon though,but for $2....who cares!

I bought some little 2 pin holders from a lighting shop,and cable tied the wires to the body

Plug a light in,and slip a cable tie around the body of the light to hold it in position.....and wal-aa! Cheap as chips rock lights!

If they get broken,it's off to the $2 shop for another pair!


I've only had one get broken so far,and another has it's lens cracked,but still on the truck and working...Will have to be replaced soon though,but for $2....who cares!

Nice.
Only upgrade I'd do is to change the cable tie to tie-wire.
Thinking along the lines of the heat generated from the light would eventually possibly melt the cable tie on a hot summers night when the vehicle is sitting idling away and lights are on --- with no air flow.
Only upgrade I'd do is to change the cable tie to tie-wire.
Thinking along the lines of the heat generated from the light would eventually possibly melt the cable tie on a hot summers night when the vehicle is sitting idling away and lights are on --- with no air flow.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
wouldnt they blow once they get wet?? either from rain or water crossings/events??Stock-man wrote:Here's my bargin basement solution![]()
I bought some little 2 pin holders from a lighting shop,and cable tied the wires to the body
Plug a light in,and slip a cable tie around the body of the light to hold it in position.....and wal-aa! Cheap as chips rock lights!
If they get broken,it's off to the $2 shop for another pair!![]()
I've only had one get broken so far,and another has it's lens cracked,but still on the truck and working...Will have to be replaced soon though,but for $2....who cares!
i was at the shops today and was chatting with a dude at the light shop he said i could use the solid stainless outdoor lights so its protected and water proof...but at $50 a pop it would be an expensive exercise!! what do you think??
EVAN
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Ebay is your friend !!
These are great, use no power , mount easy just over 16cm long and are difficult to kill....
http://cgi.ebay.com.au/LED-deck-trailer ... dZViewItem
You could also do a search on Ebay for "LED" and about a million idea's for rock lights will come up
even these would be good....
http://cgi.ebay.com.au/12V-16-WHITE-LED ... dZViewItem
These are great, use no power , mount easy just over 16cm long and are difficult to kill....
http://cgi.ebay.com.au/LED-deck-trailer ... dZViewItem
You could also do a search on Ebay for "LED" and about a million idea's for rock lights will come up
even these would be good....
http://cgi.ebay.com.au/12V-16-WHITE-LED ... dZViewItem
Harb
http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
enuf, plus some. leds these days are bloody great. most cavers use led headlamps, and thats in pitch black where not being able to see can not only be a pain in the rear, but also kill ya....evanstaniland wrote:but what kind of light do the LEDs give off??? is it much??
EVan
def a good option
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Bronwyn Bishop does it for me.[/quote]
Who is online
Users browsing this forum: No registered users and 2 guests