Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 series running gear into 40

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 34
Joined: Thu Sep 21, 2006 8:46 pm
Location: MARGATE

60 series running gear into 40

Post by CRUZERBOY »

hey guys, im postn this for a mate at work. he has a 40 series that he hydra locked at landcruiser park in the pig pen. he has now gone and bought a 60 and would like to know what needs to be done and how hard it is to swap the running gear from the 60 to the 40. any info would be great.
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

What engines are in the 40 and 60?
Top
Posts: 34
Joined: Thu Sep 21, 2006 8:46 pm
Location: MARGATE

Post by CRUZERBOY »

the motor in the 60 is diesel and he has an injected 5ltr to go into the 60. he is wanting to know how hard its going to be to put the diffs, transfer and gearbox from the 60 into the 40. any info will be great
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

So he wants to put the 5L into the 40, using the box, t-case and diffs out of the 60?
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 567
Joined: Fri Jul 20, 2007 7:37 am
Location: Panama

Contact:
Contact Tapage

Post by Tapage »

Axles could be easy ( furtheremore 60 axles are more wider by 4" or so ) and the t-case depend ...

But I thought if you have all together could be easy as well ..
HJ-60 2H-T Intercoled [url=http://4x4panama.com/foros/viewtopic.php?t=2770]Tencha[/url]
HDJ-80 1HD-T Stock so far " Marilu "
Panama
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

you will need to change where the gearbox bolts to the chassie. mine came forward about 3 inchs - needing crush tube and new plated mounts.

You may also need to cut the trans tunnel to fit the sticks, but not a great deal.

The diffs will need the perchs changing (need to come in), but there are heaps of links on here regarding that.

if its a fuel injected 5l, its going to need to be wired in, and your also going to need an adapter kit to fit it to the landcruser gearbox.......

if you use the powersteering box, your going to need to change and paly around with the tie rods, links etc etc.....

Mounting the hand brake acuator in the 40 is pretty easy, just need to drill/cut/die grind a big hole in the trans tunnel and then bolt it in....

Speedo cable is the same, so that will bolt/plug straight in



stuff like that

its not toooo hard, just time consuming and frustrating
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 34
Joined: Thu Sep 21, 2006 8:46 pm
Location: MARGATE

Post by CRUZERBOY »

thanks for the advice guys. i will pass it on to our driver at work toomorrow. thanx again :)
Top
Posts: 191
Joined: Mon Nov 29, 2004 5:42 pm
Location: melbourne

Post by kranked_dirt »

Sorry for the hi-jack guys - Reddo, do you have any pics of where you have re-mounted the gearbox, as i need to do this to mine to fit the new motor.
Cheers
went there dressed up, came back messed up

81 FJ40 hardtop - Lexus 1UZ-FE conversion underway
Top
Posts: 578
Joined: Sun Jun 17, 2007 6:44 pm
Location: melbourne

Post by Wambat »

just tell him to do what another thread is sugesting, put the 40 body on the 60 chassi, then tell me how it went as i want to do it he...
Go Hard Or GO Home
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 116 guests