Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

messed up suspension 86 lux

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 416
Joined: Tue Jul 24, 2007 7:35 pm
Location: nth qld sumwhere

messed up suspension 86 lux

Post by big lux »

ok i pulled out my springs 2day put the rears up frnt and ifs rears in i also have 2inch shackels all round and 50mm lift blocks on the rear, droped it off the hoist and the ifs go flat and the thing is almost on the bump stops in the rear looks like its doin a mono so no wheeling moro :cry: , but what do i do to get it sitting right still gt 2 2inch droped frnt cross member 2 put in yet guna make it sit evn mre crap. do i just make up super huge ginormas rear shackels to get it right or is there a better way?
Blown ls1 GQ winch truck. and GU tow car / daily
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

the rear shackles need to be 200mm eye to eye for them to be at the right angle. also if you have a terol motor you will need lifted ifs springs or lift/lowering blocks also on the rear
turbos are nice but i'd rather be blown
Posts: 416
Joined: Tue Jul 24, 2007 7:35 pm
Location: nth qld sumwhere

Post by big lux »

jus measured the snake ones are already 175 is an extra 25mm realy guna make enoughy difference was thinking mre like 400?
Blown ls1 GQ winch truck. and GU tow car / daily
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests