Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Body Liftin'

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 71
Joined: Sat Aug 04, 2007 8:38 pm
Location: Sydney

Body Liftin'

Post by spzook »

Does anyone what size diameter tha body bolts are and what pitch/thread they have. I'm having trouble so i need to make some female bolts to put on.
Cheers.
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

10.0mmX1.25, but for the effort, just buy one of Just Crusin's kits.

Steve.
Last edited by Gwagensteve on Sat Oct 27, 2007 9:41 pm, edited 1 time in total.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 71
Joined: Sat Aug 04, 2007 8:38 pm
Location: Sydney

Post by spzook »

Thanks Steve. Old mans got taps and dyes and i've got no money so guess i'll just try making some. If it goes bad then will have to start saving.
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

If you've got access to a lathe they're not that hard to make, but without a lathe it'll be hard to keep them aligned when drilling them.

The correct OD for the female bolts is 16mm.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

if you are going to make them yourself make sure you use high tensile material, alot harder to do but essential.
;)
Top
Posts: 23
Joined: Sat Sep 29, 2007 6:11 pm
Location: picton, NSW

Post by FLUFFY »

with hi tensile....sharpen your drill bit use plenty of coolant and take it easy.....
I've just made a set with socket head cap screws.
:)
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 4 guests