Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Does this bar need modifying for blueslip in NSW?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 396
Joined: Mon Jul 17, 2006 10:37 pm

Does this bar need modifying for blueslip in NSW?

Post by WRXZook »

I will soon be trying for a NSW blueslip and was wondering if I should extend this bar setup to the edge of the bodywork. Any legalities I should be looking at?

Thanks.

Click the image to enlarge.

Image
Top
Posts: 39
Joined: Sun Oct 24, 2004 10:50 am
Location: raymond terrace

Post by 9holes »

my front bar was nearly the same as yours and mine pasted blueslip
Top
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Re: Does this bar need modifying for blueslip in NSW?

Post by andrew e »

WRXZook wrote:I will soon be trying for a NSW blueslip and was wondering if I should extend this bar setup to the edge of the bodywork. Any legalities I should be looking at?
yes, no sharp edges. 25mm radius on edges i was told. However if your blueslip bloke turns a blind eye to the grooved tyres, the bar should be no problem.
Top
Posts: 396
Joined: Mon Jul 17, 2006 10:37 pm

Post by WRXZook »

Thanks for the replies, I'm looking forward to getting it on the road. Just need a bit more time to finish a couple more things.
Top
Posts: 335
Joined: Mon Oct 10, 2005 10:33 pm
Location: newcastle

Post by xenith »

mate i got pined the other day for exposed box section of chassis to the front
and told to cover it with plate to pass blue slip other wise all most same bar :roll:
it will go or it will blow
Top
Posts: 396
Joined: Mon Jul 17, 2006 10:37 pm

Post by WRXZook »

Thanks, I was wondering about that. I'll cover the chassis ends.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest