Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mk water problem

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 1301
Joined: Mon Aug 07, 2006 9:13 am
Location: bogged in a bloddy hole again.

mk water problem

Post by to_easy »

NISSAN PATROL L28 MOTOR
The other day my car was running rough so I pulled the plugs out to see if I had a dead plug and when I pulled the no:6 plug out and turned the key to see if it had spark water came out of no: 6 pot . could is be a head gasket gone around number 6 pot. ive had a look at the oil and there’s no water in it and there’s no oil in the radiator and also ive noticed a bit of water dripping out of the tail pipe when the cars running.. Any thoughts
Last edited by to_easy on Wed Nov 07, 2007 9:21 am, edited 2 times in total.
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

Post by Mousie »

just replace head gasket she probly got a bit hot n fucked the gasket..
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Posts: 210
Joined: Mon Jun 27, 2005 9:13 pm

head

Post by Sterlo »

to_easy

Mate being an L28 its prob the head that is at fault. These alloy heads were renouned for corrosion around the water ports. Hence one day it corrodes toooo far get water in cylinder. You may find that with it running you get bubbles out of the radiator. Pull head off and find out



Cheers Sterlo
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

Go to super crap and buy a bottle of rad stop leak.

BUT BUT only the one that is in a clear bottle and looks liek it has copper shavings in the bottom.

This one, and only this once has yielded 100 sucess rate on all the motors ive used it on.

Usually diclaimer and i have just put on the mandatory suit Image
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests