Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

12ht wiring HELP

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 108
Joined: Sat May 05, 2007 8:06 pm
Location: Beaconsfield/Vic

Contact:
Contact Cruza62

12ht wiring HELP

Post by Cruza62 »

I'm having trouble finishing off the wiring on the 60. I don't know which wire runs to the tacho and the oil pressure sender.
Can someone help me out and take some photos of the plug that goes to the tacho sensor out of the main loom, and of the oil pressure sender plug ?
Thanks Ben.
PS I have the manual but the colours that it has listed for the wires don't seem to be present.
62 was Petrol, now 12ht ! Body lift, lockers, spring lift, reverse offset rocrawler...? rims, NO RUST, some more stufffff....
Top
Posts: 32
Joined: Tue Nov 28, 2006 9:18 pm

Post by davec »

im a bit busy this weekend but tues i can check out my hj61 wiring if ya want,give me a yell if ya need me to have a look.
Top
Posts: 108
Joined: Sat May 05, 2007 8:06 pm
Location: Beaconsfield/Vic

Contact:
Contact Cruza62

engine

Post by Cruza62 »

That would be good, I had a look at a mates 2H but the senders are different... and I couldn't work out what plugs into the tacho sensor.
Thanks Ben.
62 was Petrol, now 12ht ! Body lift, lockers, spring lift, reverse offset rocrawler...? rims, NO RUST, some more stufffff....
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest