Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
what does this button do?????????
what does this button do?????????
is it factory or after market whats it do
does your GQ have LPG? If it does it is to do with the gas setup. i had it on mine and from memory something to do with the carby and the gas mixer or something. Can't remember been a while. When pulled out driving on the hwy it improves performance and when idling around town it should be in. Again I'm not 100% can't quite remember
Ransom note = demand + collage
its a factory switch for the parrachute dont you people know anything geez
follow it out the other side of the fuse box it must go some where
and if when its on it makes the engine run rough i'd say you have a big earth problem watch it dosen't melt or worse catch fire
follow it out the other side of the fuse box it must go some where
and if when its on it makes the engine run rough i'd say you have a big earth problem watch it dosen't melt or worse catch fire
GU Twin cab TD42T compound turbos
lwb sierra ca18det, 37" "CANT HOLD ON"
lwb sierra g16a, daily driver
https://www.suspensionstuff.com.au/shop/
lwb sierra ca18det, 37" "CANT HOLD ON"
lwb sierra g16a, daily driver
https://www.suspensionstuff.com.au/shop/
I think it is like a turbo except the power comes in from the start but if you leave it on it will reduce your power. You need to learn how and when to use it. They only put it on early model vehicles before turbos became popular.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
First and final warning for all you morons replying here.
http://www.outerlimits4x4.com/phpBB2/vi ... hp?t=33835
http://www.outerlimits4x4.com/phpBB2/vi ... hp?t=33835
The switch is located in what may be the left hand drive hand throttle position. Have been told the dash template is the same for both left and right hand drive vehicles with the hand throttle hole being plugged for the side not in use. I'm guessing its an after market switch making use of a convenient hole.
You'll have to trace the wires through.
You'll have to trace the wires through.
I like ya thinking. But that part of the dash is complete and runs the full width of the car. So I would have expect there to be a different stamping machine. For the main part of lhd and rhd dash's.Chookman wrote:The switch is located in what may be the left hand drive hand throttle position. Have been told the dash template is the same for both left and right hand drive vehicles with the hand throttle hole being plugged for the side not in use. I'm guessing its an after market switch making use of a convenient hole.
You'll have to trace the wires through.
Well atleast I am pretty sure it was, when I pulled my dash out a couple of weeks ago.
THOUGHT FOR THE DAY....
Who is online
Users browsing this forum: No registered users and 121 guests