Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

40 & 60 series rear hubs

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 199
Joined: Mon Jan 05, 2004 11:18 am
Location: Snowy Mountains

40 & 60 series rear hubs

Post by Butt Craic »

Quick, simple question... are they interchaneable?

Thanks.
I'm not very good looking, so I guess I better be useful . . .
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Re: 40 & 60 series rear hubs

Post by dumbdunce »

Butt Craic wrote:Quick, simple question... are they interchaneable?

Thanks.
yes.
Free air locker to the first 20 callers!
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Re: 40 & 60 series rear hubs

Post by Shadow »

dumbdunce wrote:
Butt Craic wrote:Quick, simple question... are they interchaneable?

Thanks.
yes.
can you simplify that answer please :P
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Re: 40 & 60 series rear hubs

Post by dumbdunce »

Shadow wrote:
dumbdunce wrote:
Butt Craic wrote:Quick, simple question... are they interchaneable?

Thanks.
yes.
can you simplify that answer please :P
no.
Free air locker to the first 20 callers!
Top
Posts: 27
Joined: Tue Mar 28, 2006 7:29 am
Location: Blenheim, NZ

Post by muddy12 »

Later model 40 with full floating rear axles should be the same. Earlier model 40's have park brake on the driveshaft so brake drums are different, and semi-floating rear axles, which may have a different spline count.

The 60 series has a wider rear, so the long side axle is longer, but short side should be the same, and diffs are the same, but check the ratio - both 40's & 60's came with 3.7 and 4.1 ratio diffs
Top
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Post by midi73 »

muddy12 wrote:Later model 40 with full floating rear axles should be the same. Earlier model 40's have park brake on the driveshaft so brake drums are different, and semi-floating rear axles, which may have a different spline count.

The 60 series has a wider rear, so the long side axle is longer, but short side should be the same, and diffs are the same, but check the ratio - both 40's & 60's came with 3.7 and 4.1 ratio diffs
He only asked about the hubs. So like dumdunce said.
YES.
Top
Posts: 199
Joined: Mon Jan 05, 2004 11:18 am
Location: Snowy Mountains

Post by Butt Craic »

simple gratitude....thanks! :lol:
I'm not very good looking, so I guess I better be useful . . .
Top
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Post by midi73 »

Butt Craic wrote:simple gratitude....thanks! :lol:
No worries.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 101 guests