Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hilux engine transplant

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 184
Joined: Mon May 21, 2007 10:15 am
Location: floatin around

hilux engine transplant

Post by 302 cruiser »

hi guys i have just got my 84 yn65 hilux and i want to do an eng swap i am thinking of going with a 5m because i can get a cressida cheap to do the transplant i was wondering if any one has put on into a yn befor and i was wondering what extra parts i would need to get that wont be int the cressida i have already found a 3 core rad
Thanks
Top
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Contact:
Contact killalux

Post by killalux »

have a look on this forum http://www.4wd.net.nz/phpbb/.
guys on there have done a few of them swaps.
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Top
Posts: 184
Joined: Mon May 21, 2007 10:15 am
Location: floatin around

Post by 302 cruiser »

thanks i will have a look
Top
Posts: 184
Joined: Mon May 21, 2007 10:15 am
Location: floatin around

Post by 302 cruiser »

surely other people have done this and can help
Top
Posts: 549
Joined: Sat Jul 23, 2005 5:33 pm
Location: Sunshine Coast

Post by Frankenyota »

Search for 5m or 7m, a few people have done it.

Also try http://board.marlincrawler.com/index.ph ... =11982.120
for 4RnrRick 7mge coversion, good write up

http://www.4wd.net.nz/phpbb/viewtopic.php?t=66
Another link to look at.

7M is a 3litre but the same bellhousing bolt patterm as a 5m.
Most 5m and 7m in aust are auto's.

Hope this helps

Matt
Top
Posts: 212
Joined: Thu Aug 21, 2003 5:15 pm
Location: Birkdale

Post by SASS »

I put a 7MGE in my RN105 dualcab.
[img]http://i147.photobucket.com/albums/r313 ... 0_1767.jpg
The Best Site For Info is http://www.supracharged.com[/img]
Stick it in low and NAIL IT !!!!!!!!!!
Top
Posts: 47
Joined: Wed Mar 14, 2007 11:17 am

Post by 2.8D_Lux »

here ya go mate you forgot the [/img] at the end

Image
Top
Posts: 184
Joined: Mon May 21, 2007 10:15 am
Location: floatin around

Post by 302 cruiser »

do you need a body lift or any thing like that. my lux is standard
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 65 guests