Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series body lift
Moderators: toaddog, Elmo, DUDELUX
60 series body lift
Can any body tell me how and what i need to do a body lift for my 60 series cruiser
Re: 60 series body lift
You'll need twelve (I think) 2" lifted body blocks, twelve longer bolts and you'll need to drop the radiator down then worry about steering and shifter clearances. Check bible.whiteghost60 wrote:Can any body tell me how and what i need to do a body lift for my 60 series cruiser
[b]1985 HJ60[/b]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
Steering should be fine if you are only going 2'', tranny shifter will be fine but you will need to trim the floor at the bottom of the transfer case (or bend the lever). All the bolts aren't the same length either, you will need to measure them all and add 2''...
FJZ80, 3 inch long travel, 35's, rear locker.
Who is online
Users browsing this forum: No registered users and 129 guests