Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
fitting 35s
Moderators: toaddog, Elmo, DUDELUX
fitting 35s
I have a 90 surf with bj spacers including diff drop spacers + 2" wound up front and am going to have 4" rear spring 2" body + adj panard, custom front bar. I AM going to put 35s on and want to know what else i need to do im going to do the cut on this tread http://www.outerlimits4x4.com/phpBB2/vi ... p?t=119653 and possibly space bumpstops to limit up travel if need be, I guess ill need to remove rear bar but do i have to do anything else to the back. Any thoughts would be great
if you aint covered in mud you aint trying hard enough
90 surf ssr ltd
Suspension lift
front lokka
Rear lockright
31" ATs and more to come
90 surf ssr ltd
Suspension lift
front lokka
Rear lockright
31" ATs and more to come
You can leave the rear bar on it just move it back all you need to do is take it off and redrill the holes on it 25mm back and at the sides slot the brackets so it can be bolted at the sides also.
For the front just hammer the seam in on both sides and a bit of the firewall and as long as you use the landcruiser rim you should be rite may get a little rub but nothing major.
For the front just hammer the seam in on both sides and a bit of the firewall and as long as you use the landcruiser rim you should be rite may get a little rub but nothing major.
What offset would i be looking at ?bulldogy wrote:
For the front just hammer the seam in on both sides and a bit of the firewall and as long as you use the landcruiser rim you should be rite may get a little rub but nothing major.
if you aint covered in mud you aint trying hard enough
90 surf ssr ltd
Suspension lift
front lokka
Rear lockright
31" ATs and more to come
90 surf ssr ltd
Suspension lift
front lokka
Rear lockright
31" ATs and more to come
what do you mean 3 3/4 back spacing. 8" = width, landcruiser offset = -23 degreebulldogy wrote:We normally run the 8" landcruiser offset with a 3 3/4 back spacing tell the tyre place a set to suit a 80 series and you will be fine.
if you aint covered in mud you aint trying hard enough
90 surf ssr ltd
Suspension lift
front lokka
Rear lockright
31" ATs and more to come
90 surf ssr ltd
Suspension lift
front lokka
Rear lockright
31" ATs and more to come
Who is online
Users browsing this forum: No registered users and 0 guests