Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Help.....Have no clutch, cable has snapped b4 (bout 3 months ago)but it seems to be ok now cos i have got a new 1 , now no clutch after mud bashing yesterday, drove it home, stopped in driveway. Got in it this morning arg no clutch again! so i started it in gear out da back to move it out the back. me thinking its a big thing atm. clutch must of said, stuff this im goin! ...lucky i have 2 cars...
Had this happen to me once. After driving through a heap of water parked it, tryed starting the next day and clutch was stuck on. I left it for a day and then it started working again. After this i noticed that the little rubber timing cover plug was missing from the side of the cluch bellhousing. The way i figure, water must have got into the clutch through this hole and mucked it up, by letting it sit the water must have evaporated. I dont know the exact mechanics of it, maybe someone else could explain
it sounds like something similar has happened to you. Check if you have the rubber plug on your cluch bellhousing. if its missing my bet is you got water in there while mud bashing.
So fingers crossed its something as simple as that
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
looked at the cable the time it happened...first instinct.
2ndly it doesnt matter if my timing plug is there or not...i have no flywheel cover......im thinking that may b the prob. getting a mate to have a squizz at it 2nite. maybe just adjust it... hopefully