75 series cruiser Inner Front Axles?

[RUFF]

First does anyone know with out a doubt what other inner axles are the same length as 75 series. Hilux,40 series,60 series?

Otherwise is there anyone here that has a pair of inner axles that they could measure for me please?

I know the CVs are interchangable i just need to work out what other inner axles are interchangable.

[basketcase]

Pretty sure Lee with the tube cruiser has 40 series chromo cv's and axles in his 75 series diffs. I'll measure his spare stocko's tomorrow at work.

[RUFF]

Pretty sure Lee with the tube cruiser has 40 series chromo cv's and axles in his 75 series diffs. I'll measure his spare stocko's tomorrow at work.

Thanks. Thats what im trying to work out. Bobby is not certain on what Axle to use for a 75 series kit as they dont have them over there. But i expected they would match something else.

[midi73]

As far as I know, the 40 is exactly the same, the 60 is the same on the short side but is longer on the long side, not sure about hilux.
Cheers.

[Tapage]

The short side it's the same in 40, 70, 60 and same bierfields between exept on new 7* series with front HP 8" axle ..

The 7* long side inner axle it's in the middle between 40 ( shorter ) and 60 series ( larger )

[RUFF]

Pretty sure Lee with the tube cruiser has 40 series chromo cv's and axles in his 75 series diffs. I'll measure his spare stocko's tomorrow at work.

Dan have you had a chance to check this?

[basketcase]

Pretty sure Lee with the tube cruiser has 40 series chromo cv's and axles in his 75 series diffs. I'll measure his spare stocko's tomorrow at work.

Dan have you had a chance to check this?

Had a look on wednesday but could not find in the pile of shit. I'll have a better look tomorrow and sms you.

[antt]

they're 40 series axles in lee's thing. they're polyperformance ones

[STIKA]

Tony
i got a thing a few years back (i think it was from pirate), from memory it was a picture with each axle/cv assembly and there relevant lengths.

i am not sure if 75 series

[STIKA]

75 series axle lengths

440mm and 738mm

[RUFF]

they're 40 series axles in lee's thing. they're polyperformance ones

Thanks Antt.

[dogbreath_48]

So can anyone confirm that a longfield FJ40 30 spline set will fit in a 75 housing (or that one is even available?)?

See the '30 Spline Axle Kit (FJ40 Conversion)' kit here:
http://www.trail-gear.com/frontaxles.html

-Stu

[bj on roids]

First does anyone know with out a doubt what other inner axles are the same length as 75 series. Hilux,40 series,60 series?

Otherwise is there anyone here that has a pair of inner axles that they could measure for me please?

I know the CVs are interchangable i just need to work out what other inner axles are interchangable.

i got a assortment at home!

[bj on roids]

Pretty sure Lee with the tube cruiser has 40 series chromo cv's and axles in his 75 series diffs. I'll measure his spare stocko's tomorrow at work.

Thanks. Thats what im trying to work out. Bobby is not certain on what Axle to use for a 75 series kit as they dont have them over there. But i expected they would match something else.

for 1984-1990 75 series (low pinion front) use a 1980-1984 FJ40 or BJ40 front axles exactly the same.

[bj on roids]

So can anyone confirm that a longfield FJ40 30 spline set will fit in a 75 housing (or that one is even available?)?

See the '30 Spline Axle Kit (FJ40 Conversion)' kit here:
http://www.trail-gear.com/frontaxles.html

-Stu

should be the same if you get the 1980-1984 kit

[bulldogy]

Im not sure if that link with the 40s will work or not it says you must replace the knuckle setup to a hilux one??

[dogbreath_48]

Im not sure if that link with the 40s will work or not it says you must replace the knuckle setup to a hilux one??

Could that be because 40's use a different type of CV compared to the hilux/75/60 etc? (which i understand are identical?)

-Stu

[bj on roids]

Im not sure if that link with the 40s will work or not it says you must replace the knuckle setup to a hilux one??

1980-1984 FJ40 knuckle is same as hilux, 60 and 75 series 1980 to 1989

[RUFF]

Im not sure if that link with the 40s will work or not it says you must replace the knuckle setup to a hilux one??

Could that be because 40's use a different type of CV compared to the hilux/75/60 etc? (which i understand are identical?)

-Stu

I think they are talking about the early Drum Brake ones need the Hilux Conversion as they had Course spline CVs. And even earlier than that had sime inbread set up that didnt even use a CV.

The Hilux CV will fit most Australian 40 series. At least anything with a Disc front they will fit defianatly.

[bj on roids]

Im not sure if that link with the 40s will work or not it says you must replace the knuckle setup to a hilux one??

Could that be because 40's use a different type of CV compared to the hilux/75/60 etc? (which i understand are identical?)

-Stu

I think they are talking about the early Drum Brake ones need the Hilux Conversion as they had Course spline CVs. And even earlier than that had sime inbread set up that didnt even use a CV.

The Hilux CV will fit most Australian 40 series. At least anything with a Disc front they will fit defianatly.

there was a changeover in the mid to late 70s, but I wouldnt risk it, and I would do the disc conversion regardless, get the AISIN hubs and the later CVs, self cleaning and self adjusting brakes...

[teambullet]

Got a set of axles cvs and hub gears for my 85 75series off bobby a month or so ago, they are 40series!
Denny